高模量聚丙烯等级多层污水管道应用力学性能增强
Enhancement of mechanical properties of high modulus polypropylene grade for multilayer sewage pipes applications
AI总结:
本研究通过添加滑石或玻璃纤维填料增强高模量聚丙烯的刚度,显著提升拉伸和弯曲模量,改善环刚度,同时保持热稳定性,适用于三层污水管道中层材料。
摘要:
技术进步为重力污水系统提供了新一代刚性聚丙烯嵌段共聚物。本研究旨在通过添加无机填料进一步增强这些材料的刚度。研究中,对三种滑石填充聚丙烯和一种玻璃纤维填充聚丙烯复合材料进行了表征,以用作三层污水管道的中层。结果表明,使用30%-50重量%滑石填充聚丙烯和30重量%玻璃纤维填充聚丙烯,拉伸模量和弯曲模量分别增加了约100%以上和250%。材料刚度的显著提高将有助于制造环刚度改善的管道。填充30重量%滑石或玻璃纤维的复合材料表现出良好的填料-基体相互作用以及良好的填料分布和分散性。然而,在填充50重量%滑石的复合材料中观察到填料-基体相互作用减弱。此外,差示扫描量热分析表明,填料的添加提高了聚丙烯基体的结晶温度。进一步地,热重分析显示,高模量聚丙烯等级在各种复合材料中保持了其热稳定性。
英文摘要:
Advances in technology have provided fresh generations of stiff polypropylene block copolymers for gravity sewerage applications. The aim of this study is to further enhance the stiffness of these materials through the incorporation of inorganic fillers. In this study, three talc filled PP and one glass fiber filled PP composites were characterized in order to be used as a middle layer in a three-layer sewage pipe. The obtained results showed an increase of approximately more than 100% and 250% in tensile and flexural moduli by the use of 30%--50___wt% talc-filled PP and 30___wt.% glass fiber-filled PP, respectively. This high increase in the rigidity of the material would allow manufacturing pipes with improving ring stiffness. Composites filled with 30___wt% talc or glass fiber showed good filler-matrix interaction and good filler distribution and dispersion. However, reduced filler-matrix interaction was observed in the case of the composite filled with 50___wt% talc. In addition, the use of Differential Scanning Calorimetry analysis revealed that the addition of fillers enhanced the crystallization temperature of the polypropylene matrix. Furthermore, Thermogravimetric Analysis showed that the high modulus PP grade retained its thermal stability in the various composites.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。