高温超导双跑道线圈的制造、表征与建模
Fabrication, Characterization and Modeling of a High-Temperature Superconducting Double Racetrack Coil
AI总结：
本文介绍了高温超导双跑道（DRC）线圈的制造、表征与建模工作，使用ReBCO带材绕制线圈并进行直流和交流测试，实验结果与3D有限元模型合理吻合，验证了制造工艺与表征方法的有效性。
摘要：
本文总结了我们在高温超导双跑道（DRC）线圈的制造、表征和建模方面的工作。使用内部开发的绕线系统，用ReBCO超导带材绕制了一个DRC。首先在直流条件下对线圈进行表征，以获得其IV特性和临界电流。然后在交流（60 Hz和120 Hz）条件下进行表征，以测量其交流损耗（AC losses）。这些测量结果与3D有限元模型进行了比较，考虑到建模假设，显示出合理的一致性。该线圈表现出良好的性能，在绕制过程中未发生任何退化，可用于进一步研究。这验证了我们的制造工艺和超导线圈表征方法。
英文摘要：
This paper summarizes our work on the fabrication, characterization, and modeling of a high-temperature superconducting double racetrack (DRC) coil. Using an in-house developed winding system, a DRC was wound with ReBCO superconducting tape. The coil was first characterized under direct current to obtain its IV characteristic and its critical current. It was then characterized under alternating current (60 Hz and 120 Hz) to measure its alternating current losses (AC losses). These measurements were compared with a 3D finite element model and show reasonable agreement given the modeling assumptions. The coil exhibits good performance, did not undergo any degradation during winding, and can be used for further studies. This validates our fabrication process and our approach to superconducting coil characterization.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
