arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2510.09445eess.SYcs.SY
收藏

压电驱动纳米定位器在迟滞非线性存在下的鲁棒复位控制设计

Robust reset control design for piezo-actuated nano-positioner in presence of hysteresis nonlinearity

Delft University of Technology(代尔夫特理工大学)

Ashkan Sebghati, S. Hassan HosseinNia

AI总结:

本文针对压电驱动纳米定位系统的迟滞非线性,提出基于复阶元件和CgLp复位控制器的鲁棒控制方案,利用SIDF/HOSIDF工具设计并优化参数,仿真验证了性能提升。

摘要:

本文针对一类压电驱动纳米定位系统的运动控制,利用频域分析设计了一种鲁棒非线性控制方案。压电材料中的迟滞非线性会降低对高频内容和不同行程范围参考轨迹的跟踪精度。作为最先进的解决方案,基于逆模型的迟滞补偿单独使用并不可靠。因此,需要一种对剩余非线性具有鲁棒性的控制框架。研究表明,在鲁棒线性控制设计中存在不可避免的局限性,难以提升性能。为放宽该限制,建立了一种基于复阶元件的鲁棒控制方法。随后,采用恒定增益超前相位(CgLp)复位控制器来实现复阶控制。控制设计基于正弦输入描述函数(SIDF)和高阶SIDF(HOSIDF)工具。提供了一个约束优化问题来整定控制参数。通过仿真验证了CgLp控制所取得的改进效果。

英文摘要:

In this paper, a robust nonlinear control scheme is designed for the motion control of a class of piezo-actuated nano-positioning systems using frequency-domain analysis. The hysteresis, the nonlinearity in the piezoelectric material, degrades the precision in tracking references with high frequency contents and different travel ranges. The hysteresis compensation by the inverse model, as the state-of-the-art solution, is not reliable alone. Therefore, a control framework with robustness against the remaining nonlinearity is needed. It is shown that there is an unavoidable limitation in robust linear control design to improve the performance. A robust control methodology based on a complex-order element is established to relax the limitation. Then, a constant-in-gain-lead-in-phase (CgLp) reset controller is utilized to realize the complex-order control. The control design is based on the sinusoidal input describing function (SIDF) and the higher-order SIDF (HOSIDF) tools. A constrained optimization problem is provided to tune the control parameters. The achieved improvements by the CgLp control is validated by the simulation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑