arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2504.17606hep-excond-mat.mtrl-sci
收藏

从表面粗糙度到烧蚀坑形成:超短脉冲激光烧蚀的二维多尺度模拟

From surface roughness to crater formation in a 2D multi-scale simulation of ultrashort pulse laser ablation

Nicolas Thomae, Maximilian Stabroth, Julian Vollmann, Markus Döring, David Redka, Heinz Paul Huber, Michael Schmidt

AI总结:

本研究通过多尺度模拟框架,结合FDTD、双温模型和CFD,发现表面粗糙度对超短脉冲激光烧蚀形貌有显著影响,铝在15纳米粗糙度下产生局部烧蚀,而AISI 304在2纳米粗糙度下无差异,强调了考虑真实粗糙度和横向热输运的必要性。

摘要:

表面粗糙度在超短脉冲激光烧蚀中起着关键作用,特别是在使用脉冲串模式操作、多脉冲激光加工以及激光诱导周期表面结构的工业应用中。因此,我们研究了表面粗糙度对模拟模型预测的激光烧蚀形貌的影响,并与实验结果进行了比较。我们提出了一个全面的多尺度模拟框架,该框架首先采用时域有限差分模拟来计算由原子力显微镜测量的粗糙表面上的表面通量分布,随后使用与流体力学/固体力学模拟耦合的双温模型进行初始材料加热。最后,开发并采用了用于材料弛豫和流体流动的计算流体动力学模型。铝和AISI 304不锈钢模拟的最终状态结果与已建立的烧蚀模型和烧蚀坑尺寸预测表现出一致性。值得注意的是,由于初始表面粗糙度为15纳米(比激光波长低70倍),铝表现出显著的光学散射效应,导致局部选择性烧蚀过程,与理想条件相比,烧蚀坑形貌发生显著改变。相反,RMS粗糙度为2纳米的AISI 304没有表现出差异。因此,我们强调将真实的、材料特定的表面粗糙度值纳入大规模烧蚀模拟的必要性。此外,诱导的局部通量变化证明了在此背景下忽略横向热输运效应的不足。

英文摘要:

Surface roughness plays a critical role in ultrashort pulse laser ablation, particularly for industrial applications using burst mode operations, multi-pulse laser processing, and the generation of laser-induced periodic surface structures. Hence, we address the impact of surface roughness on the resulting laser ablation topography predicted by a simulation model and compared to experimental results. We present a comprehensive multi-scale simulation framework that first employs finite-difference-time-domain simulations for calculating the surface fluence distribution on a rough surface measured by an atomic-force-microscope followed by the two-temperature model coupled with hydrodynamic/solid mechanics simulation for the initial material heating. Lastly, a computational fluid dynamics model for material relaxation and fluid flow is developed and employed. Final state results of aluminum and AISI 304 stainless steel simulations demonstrated alignment with established ablation models and crater dimension prediction. Notably, Al exhibited significant optical scattering effects due to initial surface roughness of 15 nm - being 70 times below the laser wavelength, leading to localized, selective ablation processes and substantially altered crater topography compared to idealized conditions. Contrary, AISI 304 with RMS roughness of 2 nm showed no difference. Hence, we highlight the necessity of incorporating realistic, material-specific surface roughness values into large-scale ablation simulations. Furthermore, the induced local fluence variations demonstrated the inadequacy of neglecting lateral heat transport effects in this context.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑