arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2503.22307physics.class-ph
收藏

滑动磨损过程中表面形貌演化的解析模型

Analytical Model of the Evolution of Surface Topography During Sliding Wear

Noël Brunetière

AI总结:

本文提出解析模型,基于Greenwood-Williamson接触理论及塑性与粘着准则,描述滑动磨损中表面形貌演化,揭示最终形貌由磨粒与粘着磨损竞争决定,并适用于抛光至擦伤等过程。

摘要:

在滑动摩擦的表面磨损过程中,存在一个磨合期,在此期间表面形貌随时间变化,直至达到稳态磨损阶段。在稳态磨损阶段,用于描述表面形貌的统计参数几乎保持不变。一些实验研究表明,以不同的表面光洁度水平开始摩擦试验,会导致在稳态磨损阶段达到相同的最终表面形貌。本文提出了一个解析模型来描述滑动磨损过程中表面形貌的演化。首先,采用Greenwood和Williamson方法描述名义上平坦的粗糙表面之间的接触。接触中的微凸体可能发生塑性变形或与对向表面发生粘着。利用塑性准则和粘着准则,可以获得表面微凸体标准差演化的微分方程。该方程具有解析解,与文献中的实验结果吻合良好。结果表明,最终表面形貌是磨粒磨损和粘着磨损竞争的结果。随后,该模型被用于描述从抛光到擦伤的不同磨损过程。

英文摘要:

During the wear process of surfaces in sliding friction, there is a running-in period during which the topography of surfaces changes with time before reaching the steady wear regime. In the steady wear regime, the statistical parameters used to describe the topography of the surfaces remain almost constant. Some experimental studies have shown that starting friction tests with different surface finish levels leads to the same final topography of surfaces in the regime of steady wear. This article proposes an analytical model to describe the evolution of the topography of surfaces during sliding wear. First of all, the Greenwood and Williamson approach is used to describe the contact between nominally flat rough surfaces. The asperities in contact may undergo plastic deformation or adhesion with the opposing surface. Using a plasticity criterion and an adhesion criterion, it is possible to obtain a differential equation for the evolution of the standard deviation of the asperities of the surfaces. This equation has an analytical solution that is in good agreement with experimental results from the literature. It is shown that the final surface topography is the result of the competition between abrasive wear and adhesive wear. The model is then used to describe different wear processes from polishing to galling.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑