用于多分辨率流固耦合的校正 Riemann 光滑粒子流体动力学方法
Corrected Riemann smoothed particle hydrodynamics method for multi-resolution fluid-structure interaction
AI总结:
本文将保守的逆核梯度校正 RKGC 引入 Riemann SPH 的流体离散,在多分辨率 FSI 模拟中提升精度、收敛性与自由表面流能量守恒。
摘要:
作为一种无网格方法,光滑粒子流体动力学(SPH)已被广泛用于流固耦合(FSI)问题的建模与模拟。虽然核梯度校正(KGC)方法通常应用于结构域以提高数值一致性,但在流体域中,能够保持守恒性的高阶一致性校正仍未得到充分利用;尽管此类校正在 FSI 分析中具有关键作用,尤其是在流体域通常具有较低分辨率的多分辨率方案中。本研究将逆核梯度校正(RKGC)公式——一种保守的高阶一致性近似——引入流体离散,以求解 FSI 问题。RKGC 已被证明可在松弛粒子条件下实现精确的二阶收敛,并提高数值精度,同时特别增强自由表面流模拟中的能量守恒。通过将该校正集成到 Riemann SPH 方法中,并采用多分辨率方案求解不同的典型 FSI 问题,数值结果一致表明,与未校正的流体离散相比,其在精度和收敛性方面均有提升。尽管取得了这些进展,进一步改进固体域和流固界面的校正技术,对于提高基于 SPH 的 FSI 建模与模拟的整体精度仍具有重要意义。
英文摘要:
As a mesh-free method, smoothed particle hydrodynamics (SPH) has been widely used for modeling and simulating fluid-structure interaction (FSI) problems. While the kernel gradient correction (KGC) method is commonly applied in structural domains to enhance numerical consistency, high-order consistency corrections that preserve conservation remain underutilized in fluid domains despite their critical role in FSI analysis, especially for the multi-resolution scheme where fluid domains generally have a low resolution. In this study, we incorporate the reverse kernel gradient correction (RKGC) formulation, a conservative high-order consistency approximation, into the fluid discretization for solving FSI problems. RKGC has been proven to achieve exact second-order convergence with relaxed particles and improve numerical accuracy while particularly enhancing energy conservation in free-surface flow simulations. By integrating this correction into the Riemann SPH method to solve different typical FSI problems with a multi-resolution scheme, numerical results consistently show improvements in accuracy and convergence compared to uncorrected fluid discretization. Despite these advances, further refinement of correction techniques for solid domains and fluid-structure interfaces remains significant for enhancing the overall accuracy of SPH-based FSI modeling and simulation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。