一种实现灵活且低材料预算设计的 ALPIDE 集成封装方法
A Packaging Method for ALPIDE Integration Enabling Flexible and Low-Material-Budget Designs
AI总结:
本文提出基于铝-聚酰亚胺柔性电缆和 spTAB 的 ALPIDE 超低材料预算封装方法,并将其扩展至三层柔性 PCB,验证其面向非平面探测器集成的可行性。
摘要:
本工作提出了一种用于 ALPIDE 芯片封装的新型解决方案,可在最小材料预算下促进非平面组装。该方案代表了一项技术进步,其基础是二十年前为 ALICE ITS1 和 STAR 径迹探测器开发的方法。该方法的核心涉及使用由铝和聚酰亚胺组成的柔性电缆,其厚度约为几十微米。这些电缆通过单点载带自动焊(spTAB)连接到传感器,取代了对曲面集成并不理想的传统引线键合技术。spTAB 键合通过在聚酰亚胺层中制作开口来实现,使铝线保持独立悬空,随后利用压力和超声能量将其连接到传感器。作为这一概念的扩展,我们将该方法应用于整块印刷电路板(PCB),从而形成一种保持超低材料预算的全柔性封装方案。本工作介绍了一个采用该方法键合 ALPIDE 芯片的原型,并将其作为未来设计的可行选项;这些设计要求芯片及相关电子器件均采用柔性封装。包括微加工和组装在内的整体工作流程在 Fondazione Bruno Kessler 和 INFN TIFPA 实验室完成,并将得到详细说明,以阐明我们的流程并证明该方案在未来实验装置中的适用性。所提出的封装具有由三个堆叠层构成的柔性 PCB,每层包含 20 μm 厚的铝图形和 25 μm 厚的聚酰亚胺基底。这些层包括接地层、信号层(同时包含数字和模拟信号)以及局部键合层(替代引线键合)。
英文摘要:
This work presents a novel solution for the packaging of ALPIDE chips that facilitates non-planar assembly with a minimal material budget. This solution represents a technological advancement based on methodologies developed for the ALICE ITS1 and the STAR tracker two decades ago. The core of this approach involves the use of flexible cables composed of aluminum and polyimide, with thicknesses on the order of tens of micrometers. These cables are connected to the sensors using single-point Tape Automated Bonding (spTAB), which replaces the traditional wire bonding technique that is suboptimal for curved integrations. The spTAB bonding is achieved by creating openings in the polyimide layer, allowing aluminum wires to remain free-standing, which are then connected to the sensor using pressure and ultrasonic energy. Extending this concept, we have applied this approach to entire printed circuit boards (PCBs), resulting in a fully flexible packaging solution maintaining an ultra-low material budget. This work introduces a prototype utilizing this method to bond an ALPIDE chip, proposing it as a viable option for future designs necessitating flexible packaging for both the chip and associated electronics. The overall workflow, comprising microfabrication and assembly, is carried out at the Fondazione Bruno Kessler and INFN TIFPA laboratories and will be detailed to elucidate our procedures and demonstrate the applicability of our solution in future experimental setups. The proposed packaging features a flexible PCB constructed from three stacked layers, each containing 20 $μ$m thick aluminum features and a 25 $μ$m thick polyimide substrate. These layers include a ground layer, a signal layer (encompassing both digital and analog signals), and a local bonding layer (which substitutes wire bonding).
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。