arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2503.09616physics.flu-dyn
收藏

用于船舶推进器的流动改善装置。概念设计研究

Flow Improving Devices For Marine Propulsers. Concept Design Study

Vladimir Sluchak

AI总结:

本文研究用于船舶推进器的流动改善装置,提出以螺旋桨上游非轴对称环形翼为核心的新型被动式方案,通过纵向涡重新分配船体边界层速度,以降低噪声振动并提高推进器效率。

摘要:

流动改善装置(FIDs)最有效地用于降低推进器引起的噪声和振动。这些装置还可以提高推进器的效率,在某些情况下应作为集成推进器的一部分加以考虑和设计,例如非轴对称导管。FIDs 可以自然地细分为两种类型:主动式和被动式。主动式装置由动力驱动,例如用于局部抽吸和注入水、空气或聚合物溶液的装置、局部加热装置等。被动式 FIDs 通常利用来流能量。有时如果不用于流动改善,这部分能量就会损失,这正是实现节能的方式。许多被动式 FIDs 基于在船体边界层中起作用的纵向涡效应。这些涡诱导的横向速度重新分配船体边界层中的纵向速度,从而影响螺旋桨来流的周向不均匀性。本文提出的几种新型 FID 解决方案的核心是一个非轴对称环形翼,它放置在螺旋桨上游、螺旋桨与附体之间。文中考虑了几种布置方式,在这些布置中环形翼的功能不同,但始终对推进器产生积极效果。

英文摘要:

Flow-improving devices (FIDs) are used the most effectively for the reduction of noise and vibration induced by a propulsor. These devices may also increase the efficiency of a propulsor and in some cases should be considered and designed as a part of an Integrated Propulsor, for example, non-axis symmetrical ducts. The FIDs may be naturally subdivided into two types: active and passive. The active ones are powered, such as the devices for local suction and injection of water, air, or polymer solutions, devices for local heating, etc. Passive FIDs are the ones that, generally speaking, use the power of inflow. Sometimes the power is lost unless not used for flow improvement, this is how the energy saving is achieved. Many passive FIDs are based on the effect of longitudinal vortices working in a boundary layer of a hull. The traversal velocities induced by these vortices redistribute the longitudinal velocities in a boundary layer of a hull and thus affect the circumferential non-uniformity of a propeller's inflow. The core of several new solutions of FIDs proposed in this document is a non-axis-symmetrical ring wing placed upstream of the propeller between the propeller and the appendages. Several arrangements are considered in which the Ring Wing functions differently but always delivers a positive effect on the Propulsor.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑