arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2503.07239physics.app-pheess.SP
收藏

Virtual VNA 3.0:利用可调耦合负载实现非互易系统的无歧义散射矩阵估计

Virtual VNA 3.0: Unambiguous Scattering Matrix Estimation for Non-Reciprocal Systems by Leveraging Tunable and Coupled Loads

Philipp del Hougne

AI总结:

本文提出Virtual VNA 3.0技术,通过VNA扩展套件为不可直接访问端口提供可调独立负载和耦合负载,结合闭式解与梯度下降法,仅用少端口VNA即可无歧义估计非互易多端口器件的完整散射矩阵,无需重新连接。

摘要:

我们提出“Virtual VNA 3.0”技术,用于在单一测量装置中估计具有N个单模端口的非互易、线性、无源、时不变被测器件(DUT)的散射矩阵,该装置仅使用一个只有N_A<N个端口的矢量网络分析仪(VNA),从而无需任何重新连接。我们将DUT端口划分为N_A个“可访问”端口和N_S个“不可直接访问”(NDA)端口。我们将可访问端口连接到VNA,将NDA端口连接到VNA扩展套件的“虚拟VNA端口”。该套件使每个NDA端口能够以三种不同的独立负载端接,或通过耦合负载连接到相邻的DUT端口。我们推导了闭式解法和梯度下降法,从N_A端口VNA在各种NDA端口端接条件下进行的测量中估计非互易DUT的完整散射矩阵。我们在N_A=N_S=4的条件下对这两种方法进行了实验验证,其中我们的DUT是一个包含环形器的复杂八端口传输线网络。总之,所提出的“Virtual VNA 3.0”技术构成了一种可扩展的方法,能够用少端口VNA(仅需N_A>1)无歧义地表征多端口非互易DUT,而无需任何繁琐、易出错且容易引入不准确性的手动重新连接。VNA扩展套件的要求与仅限于互易DUT的“Virtual VNA 2.0”技术的要求相匹配。

英文摘要:

We present the "Virtual VNA 3.0" technique for estimating the scattering matrix of a \textit{non-reciprocal}, linear, passive, time-invariant device under test (DUT) with $N$ monomodal ports using a single measurement setup involving a vector network analyzer (VNA) with only $N_\mathrm{A}<N$ ports -- thus eliminating the need for any reconnections. We partition the DUT ports into $N_\mathrm{A}$ "accessible" and $N_\mathrm{S}$ "not-directly-accessible" (NDA) ports. We connect the accessible ports to the VNA and the NDA ports to the "virtual VNA ports" of a VNA Extension Kit. This kit enables each NDA port to be terminated with three distinct individual loads or connected to neighboring DUT ports via coupled loads. We derive both a closed-form and a gradient-descent method to estimate the complete scattering matrix of the non-reciprocal DUT from measurements conducted with the $N_\mathrm{A}$-port VNA under various NDA-port terminations. We validate both methods experimentally for $N_\mathrm{A}=N_\mathrm{S}=4$, where our DUT is a complex eight-port transmission-line network comprising circulators. Altogether, the presented "Virtual VNA 3.0" technique constitutes a scalable approach to unambiguously characterize a many-port \textit{non-reciprocal} DUT with a few-port VNA (only $N_\mathrm{A}>1$ is required) -- without any tedious and error-prone manual reconnections susceptible to inaccuracies. The VNA Extension Kit requirements match those for the "Virtual VNA 2.0" technique that was limited to reciprocal DUTs.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑