arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2502.19643eess.SPcs.SYeess.SY
收藏

用于无线通信的电磁可重构流体天线系统:设计、建模、算法、制造与实验

Electromagnetically Reconfigurable Fluid Antenna System for Wireless Communications: Design, Modeling, Algorithm, Fabrication, and Experiment

Ruiqi Wang, Pinjun Zheng, Vijith Varma Kotte, Sakandar Rauf, Yiming Yang, Muhammad Mahboob Ur Rahman, Tareq Y. Al-Naffouri, Atif Shamim

AI总结:

本文提出电磁可重构流体天线系统(ER-FAS),通过软件控制流体实现辐射方向图动态重构,并开发低复杂度贪心波束成形算法,仿真与实验验证其在近远场显著提升频谱效率。

摘要:

本文提出了电磁可重构流体天线系统(ER-FAS)的概念、设计、信道建模、波束成形算法开发、原型制造和实验测量,其中每个FAS阵列单元具有电磁(EM)可重构性。与大多数现有FAS工作通过调整阵列单元的位置和/或方向来研究空间可重构性不同,所提出的ER-FAS能够直接控制每个单元的电磁特性,实现动态辐射方向图可重构性。具体而言,提出了一种利用软件控制流体的新型ER-FAS架构,并建立了相应的无线信道模型。基于该ER-FAS信道模型,开发了一种低复杂度的贪心波束成形算法,以联合优化每个阵列单元的模拟相移和辐射状态。通过(i)全波电磁仿真和(ii)数值频谱效率评估,验证了ER-FAS信道模型的准确性和波束成形算法的有效性。这些结果证实,与传统天线阵列相比,所提出的ER-FAS在近场和远场场景中均显著提高了频谱效率。为进一步验证该设计,我们使用Galinstan液态金属合金、流体银浆和软件控制流体通道制造了ER-FAS单元和阵列的原型。通过在半消声室中进行的原型测量,实验结果验证了仿真结果。此外,使用一对软件定义无线电进行的多次室内通信实验展示了ER-FAS原型优越的接收功率和误码率性能。

英文摘要:

This paper presents the concept, design, channel modeling, beamforming algorithm development, prototype fabrication, and experimental measurement of an electromagnetically reconfigurable fluid antenna system (ER-FAS), in which each FAS array element features electromagnetic (EM) reconfigurability. Unlike most existing FAS works that investigate spatial reconfigurability by adjusting the position and/or orientation of array elements, the proposed ER-FAS enables direct control over the EM characteristics of each element, allowing for dynamic radiation pattern reconfigurability. Specifically, a novel ER-FAS architecture leveraging software-controlled fluidics is proposed, and corresponding wireless channel models are established. Based on this ER-FAS channel model, a low-complexity greedy beamforming algorithm is developed to jointly optimize the analog phase shift and the radiation state of each array element. The accuracy of the ER-FAS channel model and the effectiveness of the beamforming algorithm are validated through (i) full-wave EM simulations and (ii) numerical spectral efficiency evaluations. These results confirm that the proposed ER-FAS significantly enhances spectral efficiency in both near-field and far-field scenarios compared to conventional antenna arrays. To further validate this design, we fabricate prototypes for both the ER-FAS element and array, using Galinstan liquid metal alloy, fluid silver paste, and software-controlled fluidic channels. The simulation results are experimentally validated through prototype measurements conducted in an anechoic chamber. Additionally, several indoor communication experiments using a pair of software-defined radios demonstrate the superior received power and bit error rate performance of the ER-FAS prototype.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑