圆柱壳在扭转与轴向联合载荷下的屈曲和后屈曲
Buckling and post-buckling of cylindrical shells under combined torsional and axial loads
AI总结:
本文通过实验、理论和有限元模拟,系统研究了圆柱壳在扭转与轴向联合载荷下的屈曲和后屈曲行为,发现联合载荷导致不同于单一载荷的后屈曲模式,如从对角形转变为扭曲菱形模式。
摘要:
在过去的一个世纪里,圆柱壳的屈曲行为因其丰富的非线性行为和广泛的工程应用而引起了极大的关注。虽然圆柱壳在单一载荷(如压缩或扭转)下的屈曲已被广泛研究,但在扭转和轴向联合载荷下的屈曲行为在很大程度上仍未得到探索。本文基于实验、理论建模和有限元模拟的结合,系统地研究了圆柱壳在扭转和轴向联合载荷下的屈曲和后屈曲行为。考虑了三种不同类型的联合载荷:预扭转下的压缩、预拉伸下的扭转和预压缩下的扭转。理论模型在Donnell壳体理论的框架内建立,并使用Galerkin方法求解,通过该方法可以确定夹紧-夹紧薄圆柱壳在各种类型载荷下的临界屈曲载荷、临界周向波数、屈曲模式和屈曲后平衡路径。理论预测与有限元模拟吻合良好,并定性地捕捉了实验中观察到的各种屈曲现象。研究发现,与单一压缩或扭转载荷相比,圆柱壳在联合载荷下表现出相当不同的后屈曲行为。例如,当夹紧-夹紧薄圆柱壳承受纯扭转或相对较小预压缩的扭转时,在变形过程中始终呈现对角形模式。然而,在相对较大的预压缩下,壳体从对角形模式转变为扭曲的菱形模式。
英文摘要:
The buckling behavior of cylindrical shells has gained significant interest over the past century due to its rich nonlinear behavior and broad engineering applications. While the buckling of cylindrical shells under a single load (e.g., compression or torsion) has been extensively studied, the buckling behavior under combined torsional and axial loads remains largely unexplored. In this paper, based on a combination of experiments, theoretical modeling, and finite element simulations, we systematically investigate the buckling and post-buckling behavior of cylindrical shells under combined torsional and axial loads. Three different types of combined loads are considered: compression with pre-torsion, torsion with pre-tension, and torsion with pre-compression. The theoretical model is established within the framework of the Donnell shell theory and solved using the Galerkin method, through which the critical buckling load, critical circumferential wavenumber, buckling pattern, and post-buckling equilibrium path of clamped-clamped thin cylindrical shells under various types of loads can be determined. The theoretical predictions agree well with finite element simulations and qualitatively capture the various buckling phenomena observed in the experiments. It is found that cylindrical shells exhibit quite different post-buckling behavior under combined loads compared to under a single compressive or torsional load. For instance, when a clamped-clamped thin cylindrical shell is subjected to pure torsion or torsion with a relatively small pre-compression, it consistently shows a diagonal-shaped pattern during deformation. However, with a relatively large pre-compression, the shell transitions from a diagonal-shaped pattern to a twisted diamond-shaped pattern.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。