arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2412.03055eess.SPcs.CV
收藏

基于边云协同的AAV天线干扰实时检测AIoT系统

Real-Time AIoT for AAV Antenna Interference Detection via Edge-Cloud Collaboration

School of Data Science and Engineering, and Xingzhi College, South China Normal University(数据科学与工程学院及南中国师范大学xingzhi学院);School of Physics, South China Normal University(物理学院);Department of Electronic and Computer Engineering, Hong Kong University of Science and Technology(电子与计算机工程系);Key Laboratory of Advanced Control for Light Industry Processes, Ministry of Education, Jiangnan University(轻工业过程先进控制重点实验室);School of Electronics and Information Engineering, and Xingzhi College, South China Normal University(电子与信息工程学院及南中国师范大学xingzhi学院)

Jun Dong, Jintao Cheng, Jin Wu, Chengxi Zhang, Shunyi Zhao, Xiaoyu Tang

AI总结:

本文提出一种基于边云协同(ECC+)的AIoT系统,通过EdgeAnt检测器与AntSort跟踪器实现无人机天线干扰源实时定位,显著降低端到端延迟并提升准确率。

摘要:

在第五代(5G)时代,消除通信干扰源对于维持网络性能至关重要。干扰通常源于未经授权或发生故障的天线,无线电监测部门每年必须处理大量此类天线干扰源。无人机(UAV)可以提高巡检效率。然而,现有纯云端(CO)人工智能(AI)模式下的数据传输延迟无法满足实时性对低时延的要求。因此,我们提出一种基于计算机视觉的智能物联网(AIoT)系统,用于检测无人机的天线干扰源。该系统采用优化的边云协同(ECC+)模式,结合关键帧选择算法(KSA),重点降低端到端延迟(E2EL)并确保可靠数据传输,这符合超可靠低时延通信(URLLC)的核心原则。我们方法的核心是基于检测跟踪(TBD)范式的端到端天线定位方案,包括检测器(EdgeAnt)和跟踪器(AntSort)。EdgeAnt在我们自建的天线干扰源数据集上实现了最先进(SOTA)性能,平均精度均值(mAP)为42.1%,仅需300万参数和14.7 GFLOPs。在COCO数据集上,EdgeAnt以5.4 GFLOPs实现了38.9%的mAP。我们将EdgeAnt部署在Jetson Xavier NX(TRT)和Raspberry Pi 4B(NCNN)上,分别实现了21.1(1088)和4.8(640)帧每秒(FPS)的实时推理速度。与CO模式相比,ECC+模式将E2EL降低了88.9%,准确率提高了28.2%。此外,该系统为多无人机协同巡检提供了出色的可扩展性。检测器代码已在https://github.com/SCNU-RISLAB/EdgeAnt公开。

英文摘要:

In the fifth-generation (5G) era, eliminating communication interference sources is crucial for maintaining network performance. Interference often originates from unauthorized or malfunctioning antennas, and radio monitoring agencies must address numerous sources of such antennas annually. Unmanned aerial vehicles (UAVs) can improve inspection efficiency. However, the data transmission delay in the existing cloud-only (CO) artificial intelligence (AI) mode fails to meet the low latency requirements for real-time performance. Therefore, we propose a computer vision-based AI of Things (AIoT) system to detect antenna interference sources for UAVs. The system adopts an optimized edge-cloud collaboration (ECC+) mode, combining a keyframe selection algorithm (KSA), focusing on reducing end-to-end latency (E2EL) and ensuring reliable data transmission, which aligns with the core principles of ultra-reliable low-latency communication (URLLC). At the core of our approach is an end-to-end antenna localization scheme based on the tracking-by-detection (TBD) paradigm, including a detector (EdgeAnt) and a tracker (AntSort). EdgeAnt achieves state-of-the-art (SOTA) performance with a mean average precision (mAP) of 42.1% on our custom antenna interference source dataset, requiring only 3 million parameters and 14.7 GFLOPs. On the COCO dataset, EdgeAnt achieves 38.9% mAP with 5.4 GFLOPs. We deployed EdgeAnt on Jetson Xavier NX (TRT) and Raspberry Pi 4B (NCNN), achieving real-time inference speeds of 21.1 (1088) and 4.8 (640) frames per second (FPS), respectively. Compared with CO mode, the ECC+ mode reduces E2EL by 88.9%, increases accuracy by 28.2%. Additionally, the system offers excellent scalability for coordinated multiple UAVs inspections. The detector code is publicly available at https://github.com/SCNU-RISLAB/EdgeAnt.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑