脉冲调制合成喷流流动控制中 duty cycle 的作用
Role of Duty Cycle in Burst-Modulated Synthetic Jet Flow Control
AI总结:
研究脉冲调制合成喷流流动控制中 duty cycle 和喷射比对 stalled NACA 0025 翼型在 Re_c=10^5 时的影响,探讨了气动性能、能耗和流动稳定性。
摘要:
在 Re_c=10^5 下,通过实验研究了 duty cycle (DC) 和喷射比对 stalled NACA 0025 翼型合成喷流流动控制的影响。测试了具有脉冲调制的有限跨度微喷嘴阵列,以评估气动性能、能耗和流动稳定性。当达到一定动量系数时,通过增加 DC 或喷射比实现流动再附着。再附着后,控制效果显著增强,额外动量带来升力、横向控制和流动稳定性的小幅提升,但最终趋于饱和。在 DC 仅为 5% 时观察到显著升力提升,表明短暂高动量喷射是最节能的再附着方式。然而,低 DC 会导致横向涡旋在流体控制中的不一致轴向耗散,降低流动稳定性。高 DC 控制策略提供了更一致的边界层控制。这些结果为在气动性能和稳定性之间平衡与能耗的控制策略提供了框架。
英文摘要:
The effect of duty cycle (DC) and blowing ratio on synthetic jet flow control over a stalled NACA 0025 airfoil at Re_c=10^5 was investigated experimentally. A finite-span microblower array operating with burst modulation was tested across a wide range of control parameters to assess aerodynamic performance, power consumption, and flow stability. Flow reattachment was achieved once a threshold momentum coefficient was met via increasing either the DC or blowing ratio. Control effectiveness increased sharply upon reattachment, with additional momentum providing incremental improvements in lift, spanwise control, and flow stability, though these effects eventually saturated. Substantial lift improvements are observed at DCs as low as 5%, indicating that brief, high-momentum bursts were the most power-efficient for achieving reattachment. However, flow stability was reduced at low DCs due to the inconsistent streamwise dissipation of spanwise vortices responsible for flow control. Higher DC control strategies resulted in more consistent boundary layer control. These results provide a framework for selecting control strategies that balance aerodynamic performance and stability with power efficiency.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。