arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2409.19782eess.AScs.SD
收藏

吉他拾音器 I:绕线匝数与线径对单线圈电吉他拾音器影响的分析

Guitar Pickups I: Analysis of the Effect of Winding and Wire Gauge on Single Coil Electric Guitar Pickups

Nottingham Trent University(诺丁汉特伦特大学);University of Lincoln(林肯大学)

Charles Batchelor, Jack Gooding, William Marriott, Nikola Chalashkanov, Nick Tucker, Rebecca Margetts

AI总结:

本文通过制作仅改变单一参数的实验单线圈拾音器,系统研究绕线匝数和线径对拾音器谐振频率与输出幅值的影响,揭示匝数增加使音色更暗、输出更高,而较粗线径使输出更大、音色更亮。

摘要:

吉他拾音器已经生产了近 100 年,但一个拾音器究竟如何在音色上优于另一个拾音器,至今仍存在很大争议。本文是一组旨在揭开吉他拾音器生产过程神秘面纱、并将科学程序引入相关讨论的系列论文中的第一篇。以往的研究分析了市售现成拾音器,但这些拾音器在多个方面彼此不同。本研究的创新之处在于制作了专用的实验拾音器,这些拾音器每次只改变一个参数,以便进行科学研究。本文研究了单线圈拾音器最基本的特性:绕线匝数和线径。研究制作了一组单线圈 Stratocaster 风格拾音器,绕线匝数在商业可用范围内变化(5000–12000 匝),并针对两种广泛使用的线径(42 和 44 AWG)分别进行。使用频率响应分析仪获取了频率范围内的阻抗。结果表明,谐振频率随绕线匝数呈指数下降,而谐振峰幅值随绕线匝数线性增加。所用线径对这两个参数都有显著影响,在相同匝数下,较粗的线比较细的线产生更高的谐振频率和更高的幅值。这些因素会影响与拾音器相关的声音:谐振频率与拾音器被感知的音色相关,而幅值与输出幅度相关,因此与“增益”相关。增加绕线匝数将得到输出更高、音色更暗的拾音器,而较粗的线则给出更大的输出和更明亮的音色——这与在商业拾音器中可以观察到的情况一致。

英文摘要:

Guitar Pickups have been in production for nearly 100 years, and the question of how exactly one pickup is tonally superior to another is still subject to a high level of debate. This paper is the first in a set demystifying the production of guitar pickups and introducing a level of scientific procedure to the conversation. Previous studies have analysed commercial off-the-shelf pickups, but these differ from each other in multiple ways. The novelty of this study is that dedicated experimental pickups were created, which vary only one parameter at a time in order to allow scientific study. The most fundamental qualities of a single-coil pickup are investigated: in this paper, number of turns and gauge of wire. A set of single-coil stratocaster-style pickups were created, with the number of turns of wire varied across the commercially available range (5000-12000 turns), and this was done for two widely used wire gauges (42 and 44 AWG). A frequency response analyser was used to obtain impedance across a frequency range. It is shown that resonant frequency decreases exponentially with number of turns, while the magnitude of the resonant peak increases linearly with number of turns. The wire gauge used has a significant impact on both parameters, with the thicker wire giving higher resonant frequencies and higher magnitudes than the thinner wire for the same number of turns. These impact the sound associated with the pickup: the resonant frequency is linked to the perceived tone of the pickup, and the magnitude to the output amplitude and hence 'gain.' Increasing the number of turns will give a higher output pickup with a darker tone, and thicker wire gives louder outputs and brighter tones - consistent with what can be observed in commercial pickups.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑