arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2409.19630physics.app-ph
收藏

非绝缘DEMO环向场线圈的数值分析

Numerical analysis of non-insulated DEMO TF coils

M. Ortino, N. Bykovskiy, X. Sarasola, P. Bruzzone, K. Sedlak

AI总结:

本文针对EUROfusion DEMO环向场线圈,提出一种耦合电-热物理的三维数值模型,快速模拟充放电与失超,并开展匝间局部桥接参数化研究,为非绝缘线圈的热稳定性和失超保护设计提供分析依据。

摘要:

在匝间或层间无绝缘/部分绝缘的小型螺线管设计已被证明比标准绝缘情况具有更高的热稳定性。该技术意味着更高的安全标准,单个环向场(TF)线圈中允许的最高电压为1-100 V;同时,被动/更简单的失超保护系统(QPS)成为一种切实可行的选择。此外,大型螺线管上的实验和模拟尚不能保证同样的优势,因为失超后电流的重新分布尚不明确,且低温超导(LTS)所允许的温度裕度更窄。本文对全内部能量耗散的可能性进行了分析讨论,强调了已经达到的较高最终温度以及所持假设的局限性。因此,本研究提出了一种新的有效三维原创数值模型,该模型通过在同一求解器中耦合电学和热学物理,用于快速模拟EUROfusion DEMO环向场(TF)线圈的充放电和失超过程。文中解释了该模型的结构及其初步基准测试。最后,报告了仅考虑匝间局部桥接的参数化研究的首批结果,讨论了该模拟工作的影响和未来展望。

英文摘要:

The design of small solenoids without/with-partial insulation among turns or layers has been proven to grant higher thermal stability than for standard insulated cases. This technology implies higher safety standards, by allowing for 1-100 V highest voltage in the single TF coil; at the same time, a passive/simpler quench protection systems (QPS) becomes a concrete opportunity. Besides, experiments and simulations on large-scale solenoids do not guarantee yet the same advantages, as the redistribution of currents after quench is not yet clear and the temperature margins allowed by LTS are narrower. The possibility for full internal energy dissipation is here discussed analytically, highlighting the already high final temperatures being reached and the limits of the held hypotheses. \\ This study presents therefore a new effective 3-D original numerical model, developed for simulating in a fast fashion charge/discharge and quench of a EUROfusion DEMO toroidal field (TF) coil, by coupling both electrical and thermal physics in the same solver. Its structure is explained as well as its first benchmarks. Finally, the first results are reported of a parametric study where only turn-turn localized bridges are considered, discussing the consequences and the future outlook for this simulation work.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑