广义切线稳定非线性弹性:一种控制材料和几何不稳定性的自动化框架
Generalised tangent stabilised nonlinear elasticity: An automated framework for controlling material and geometric instabilities
AI总结:
本文将切线稳定弹性的概念推广至几乎所有非线性弹性不变量公式,推导了多种基于F、C、b的封闭形式切线特征系统及精确凸性条件,并扩展至横观各向同性,提出几何稳定多凸大应变弹性框架以控制材料和几何不稳定性。
摘要:
Poya等人[1]最近提出了切线稳定的大应变各向同性弹性,通过直接使用主拉伸,本构和几何/初始刚度项的整个特征结构以封闭形式获得,为离散环境下高度非凸函数的精确凸性条件提供了新见解。因此,基于这些切线特征值,提出了一种解析切线稳定方法,绕过了非线性有限元分析中常规使用的现有数值方法。该公式对于复杂变形的准静态模拟似乎极其稳健,即使没有载荷增量和时间步长,也能以路径跟踪技术在实际中不可行的方式自动捕获不稳定性。在这项工作中,我们将切线稳定弹性的概念推广到几乎所有已知的非线性弹性不变量公式中。我们表明,无论不变量公式或完整性基如何,切线的封闭形式特征分解都很容易获得。特别地,我们推导了基于各向同性Total Lagrangian变形梯度(F)和右Cauchy-Green(C)以及基于Updated Lagrangian左Cauchy-Green(b)公式的封闭形式切线特征系统,并提出了以相应切线和初始刚度特征值表示的精确凸性条件。此外,我们引入了几何稳定的多凸大应变弹性的概念,适用于材料稳定但表现出几何不稳定性的模型,我们以解析方式以谱分解形式构建了它们的初始刚度。我们进一步将该框架扩展到横观各向同性的情况,再次为常见的横观各向同性不变量找到了封闭形式的切线特征系统。
英文摘要:
Tangent stabilised large strain isotropic elasticity was recently proposed by Poya et al. [1] wherein by working directly with principal stretches the entire eigenstructure of constitutive and geometric/initial stiffness terms were found in closed-form, giving fresh insights into exact convexity conditions of highly non-convex functions in discrete settings. Consequently, owing to these tangent eigenvalues an analytic tangent stabilisation was proposed bypassing incumbent numerical approaches routinely used in nonlinear finite element analysis. This formulation appears to be extremely robust for quasi-static simulation of complex deformations even with no load increments and time stepping while still capturing instabilities automatically in ways that are infeasible for path-following techniques in practice. In this work, we generalise the notion of tangent stabilised elasticity to virtually all known invariant formulations of nonlinear elasticity. We show that, closed-form eigen-decomposition of tangents is easily available irrespective of invariant formulation or integrity basis. In particular, we work out closed-form tangent eigensystems for isotropic Total Lagrangian deformation gradient (F )-based and right Cauchy-Green (C)-based as well as Updated Lagrangian left Cauchy-Green (b)-based formulations and present their exact convexity conditions postulated in terms of their corresponding tangent and initial stiffness eigenvalues. In addition, we introduce the notion of geometrically stabilised polyconvex large strain elasticity for models that are materially stable but exhibit geometric instabilities for whom we construct their initial stiffness in a spectrally-decomposed form analytically. We further extend this framework to the case of transverse isotropy where once again, closed-form tangent eigensystems are found for common transversely isotropic invariants.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。