含氟苯与烃类混合物的热力学
Thermodynamics of mixtures containing a fluorinated benzene and a hydrocarbon
AI总结:
本研究通过DISQUAC和UNIFAC模型及结构因子分析,揭示了含氟苯与烃类混合物的热力学性质,包括双重共沸、正过量焓及异种配位主导等特征。
摘要:
本文利用文献中的热力学性质,并应用DISQUAC和UNIFAC(多特蒙德)模型以及浓度-浓度结构因子($S_{\ ext{CC}}(0)$),研究了氟苯、1,4-二氟苯或六氟苯与烷烃的混合物,以及六氟苯与苯、甲苯或1,4-二甲苯的体系。对于DISQUAC,确定了F/烷烃和F/芳香族接触的相互作用参数,而对于UNIFAC,这些参数取自文献。两种模型均预测C$_6$F$_6$ + C$_6$H$_6$体系存在双重共沸,尽管温度范围不同。氟苯或1,4-二氟苯与正烷烃体系的过量摩尔焓($H_{\ ext{m}}^{\ ext{E}}$)为正,且模型使用与正烷烃无关的相互作用参数能准确描述,排除了帕特森效应。DISQUAC计算证实了C$_6$F$_6$ + 正烷烃混合物的这一结论。对于涉及正烷烃的溶液,DISQUAC在过量摩尔等压热容($C_{p\ ext{m}}^{\ ext{E}}$)方面,以及对于C$_6$F$_6$ + 芳香烃体系的$H_{\ ext{m}}^{\ ext{E}}$,其结果优于UNIFAC。对于给定正烷烃的混合物,过量摩尔内能($U_{V\ ext{m}}^{\ ext{E}}$)和$H_{\ ext{m}}^{\ ext{E}}$随氟代烃的相对变化不同,这是由于结构效应。C$_6$F$_6$ + 芳香烃混合物以异种分子间的相互作用为特征,如其负的$H_{\ ext{m}}^{\ ext{E}}$值所示。$S_{\ ext{CC}}(0)$形式表明,在C$_6$F$_6$ + 正烷烃混合物中,同种配位比在相应的C$_6$H$_5$F体系中更重要,而在C$_6$F$_6$与芳香烃的溶液中,异种配位占主导。
英文摘要:
Fluorobenzene, or 1,4-difluorobenzene or hexafluorobenzene + alkane mixtures and hexafluorobenzene + benzene, or + toluene, or + 1,4-dimethylbenzene systems have been studied using thermodynamic properties from the literature and through the application of the DISQUAC and UNIFAC (Dortmund) models and the concentration-concentration structure factor ($S_{\text{CC}}(0)$). Interaction parameters for the contacts F/alkane and F/aromatic have been determined for DISQUAC, and they have been taken from the literature for UNIFAC. Both models predict double azeotropy for the C$_6$F$_6$ + C$_6$H$_6$ system, although in different temperature ranges. Excess molar enthalpies ($H_{\text{m}}^{\text{E}}$) of the fluorobenzene, or 1,4-difluorobenzene + n-alkane systems are positive and are accurately described by the models using interaction parameters independent of the n-alkane, discarding Patterson's effect in such mixtures. DISQUAC calculations confirm that conclusion for C$_6$F$_6$ + n-alkane mixtures. DISQUAC provides better results than UNIFAC on excess molar isobaric heat capacities ($C_{p\text{m}}^{\text{E}}$) of solutions involving n-alkanes, or on $H_{\text{m}}^{\text{E}}$ of C$_6$F$_6$ + aromatic hydrocarbon systems. For mixtures with a given n-alkane, the relative variation of excess molar internal energies at constant volume ($U_{V\text{m}}^{\text{E}}$) and $H_{\text{m}}^{\text{E}}$ and with the fluorohydrocarbons is different, due to structural effects. C$_6$F$_6$ + aromatic hydrocarbon mixtures are characterized by interactions between unlike molecules, as seen from their negative $H_{\text{m}}^{\text{E}}$ values. The $S_{\text{CC}}(0)$ formalism reveals that homocoordination is more important in C$_6$F$_6$ + n-alkane mixtures than in the corresponding systems with C$_6$H$_5$F, and that heterocoordination is dominant in the solutions of C$_6$F$_6$ with an aromatic hydrocarbon.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。