纳米流体在铜泡沫中沸腾的实验研究
Experimental Study on Boiling of Nanofluids in Copper Foam
AI总结:
本文通过实验研究水和纳米流体在铜泡沫中的沸腾,发现液体挤出受表面润湿性而非重力影响,并据此设计导液装置以缓解热管毛细芯内纳米颗粒积聚。
摘要:
纳米流体是纳米尺度颗粒(如金属及其氧化物)在基础流体(如水、油或醇)中的悬浮液,能够显著增强基础流体的传热性能。然而,当纳米流体应用于热管时,纳米颗粒通常会在热管的毛细芯内积聚,造成堵塞并增加热阻。本文通过实验方法研究了由铜泡沫强化的水和纳米流体的沸腾现象。当液体注入放置在加热板上的铜泡沫中时,在沸腾过程中,一部分液体会沿铜泡沫受热表面的边界被挤出。该现象与重力无关,但与加热表面的亲水性或疏水性有关。基于这些特性,我们设计了一种装置,将被挤出的液体引导至其他位置,从而为解决热管毛细芯中纳米颗粒积聚的问题提供了一种有前景的方案。
英文摘要:
Nanofluids are suspensions of nanoscale particles (such as metals and their oxides) in base fluids (such as water, oil, or alcohol), which can significantly enhance the heat transfer performance of the base fluid. However, when nanofluids are applied to heat pipes, it is common for nanoparticles to accumulate within the heat pipe's capillary wick, clogging it and increasing thermal resistance. This paper investigates the phenomenon of boiling of water and nanofluids enhanced by copper foam through experimental methods. When the liquid is injected into copper foam placed on a heating plate, some of the liquid is squeezed out along the boundary of the heated surface of the copper foam during boiling. This phenomenon is independent of gravity but related to the hydrophilicity or hydrophobicity of the heating surface. Based on these properties, we design a device to guide the squeezed-out liquid to other locations, offering a promising solution to the problem of nanoparticle accumulation in the heat pipe's capillary wick.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。