揭示钢筋腐蚀速率与钢筋混凝土腐蚀致裂之间的相互作用
Unravelling the interplay between steel rebar corrosion rate and corrosion-induced cracking of reinforced concrete
AI总结:
针对加速外加电流试验低估裂缝扩展、高估剥落时间的问题,提出考虑铁锈成分与密度变化的虚拟腐蚀致裂模型,并引入裂缝宽度斜率修正系数以预测自然腐蚀条件。
摘要:
加速外加电流试验是评估腐蚀致裂敏感性最常用的实验方法,而腐蚀致裂是钢筋混凝土结构耐久性面临的最突出挑战。众所周知,与自然条件相比,加速外加电流试验会导致裂纹扩展(相对于腐蚀渗透)更慢,从而高估分层/剥落时间,但这一现象的根源已困扰研究人员超过四分之一个世纪。鉴于近期的实验发现,本文假定该现象可归因于铁锈成分和密度的可变性,特别是受所施加腐蚀电流密度大小影响的氧化铁与氢氧化氧化铁质量分数之比的可变性。基于这一假设,提出了一种用于虚拟外加电流试验的腐蚀致裂模型。采用所提模型获得的模拟结果与实验数据进行了验证,显示出良好的一致性。重要的是,该模型能够预测自然条件下的腐蚀致裂,从而可计算新提出的裂缝宽度斜率修正系数,将加速外加电流试验期间测得的表面裂缝宽度外推至自然条件下的腐蚀。
英文摘要:
Accelerated impressed current testing is the most common experimental method for assessing the susceptibility to corrosion-induced cracking, the most prominent challenge to the durability of reinforced concrete structures. Although it is well known that accelerated impressed current tests lead to slower propagation of cracks (with respect to corrosion penetration) than in natural conditions, which results in overestimations of the delamination/spalling time, the origins of this phenomenon have puzzled researchers for more than a quarter of a century. In view of recent experimental findings, it is postulated that the phenomenon can be attributed to the variability of rust composition and density, specifically to the variable ratio of the mass fractions of iron oxide and iron hydroxide-oxide, which is affected by the magnitude of the applied corrosion current density. Based on this hypothesis, a corrosion-induced cracking model for virtual impressed-current testing is presented. The simulation results obtained with the proposed model are validated against experimental data, showing good agreement. Importantly, the model can predict corrosion-induced cracking under natural conditions and thus allows for the calculation of a newly proposed crack width slope correction factor, which extrapolates the surface crack width measured during accelerated impressed current tests to corrosion in natural conditions.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。