具有失调抵消功能的倒金字塔三轴硅霍尔效应磁传感器
Inverted Pyramid 3-axis Silicon Hall Effect Magnetic Sensor With Offset Cancellation
AI总结:
提出一种基于MEMS倒金字塔结构的单芯片三轴硅霍尔传感器,通过多偏置检测模式与电流旋转技术实现三维磁场检测及一至三个数量级的失调降低。
摘要:
微电子磁传感器在汽车、工业和消费电子等多种应用中至关重要。霍尔效应器件占据磁传感器市场的最大份额,并因其可靠性、低成本和CMOS兼容性而尤其受到重视。本文介绍了一种基于倒金字塔结构的新型三轴霍尔效应传感器元件,该元件通过利用MEMS微加工和CMOS工艺实现。器件通过使用TMAH刻蚀金字塔形开口,并在倾斜侧壁上注入n型掺杂剂以定义有源区来制造。通过使用多种偏置-检测模式,该器件能够在单个紧凑结构内检测面内和面外磁场。此外,采用电流旋转方法可将失调显著降低一至三个数量级。本工作提出的器件展示了较高的面内和面外电流相关及电压相关灵敏度,范围分别为64.1至198 V A$^{-1}$ T$^{-1}$和14.8至21.4 mV V$^{-1}$ T$^{-1}$,串扰低于3.7%。该传感器的热噪声底在1.31 V供电下约对应0.5 $μ$T/$\sqrt{Hz}$。这种新型霍尔效应传感器为现有最先进的三轴磁传感器提供了一种有前景且更简单的替代方案,为位置反馈和功率监测等各种应用中的精确、可靠磁场感测提供了可行解决方案。
英文摘要:
Microelectronic magnetic sensors are essential in diverse applications, including automotive, industrial, and consumer electronics. Hall-effect devices hold the largest share of the magnetic sensor market, and they are particularly valued for their reliability, low cost and CMOS compatibility. This paper introduces a novel 3-axis Hall-effect sensor element based on an inverted pyramid structure, realized by leveraging MEMS micromachining and CMOS processing. The devices are manufactured by etching the pyramid openings with TMAH and implanting the sloped walls with n-dopants to define the active area. Through the use of various bias-sense detection modes, the device is able to detect both in-plane and out-of-plane magnetic fields within a single compact structure. In addition, the offset can be significantly reduced by one to three orders of magnitude by employing the current-spinning method. The device presented in this work demonstrated high in-plane and out-of-plane current- and voltage-related sensitivities ranging between 64.1 to 198 V A$^{-1}$ T$^{-1}$ and 14.8 to 21.4 mV V$^{-1}$ T$^{-1}$, with crosstalk below 3.7 %. The sensor exhibits a thermal noise floor which corresponds to approximately 0.5 $μ$T/$\sqrt{Hz}$ at 1.31 V supply. This novel Hall-effect sensor represents a promising and simpler alternative to existing state-of-the-art 3-axis magnetic sensors, offering a viable solution for precise and reliable magnetic field sensing in various applications such as position feedback and power monitoring.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。