面向表面检测的轮廓测量传感器轨迹优化强化学习方法
Reinforcement Learning Approach to Optimizing Profilometric Sensor Trajectories for Surface Inspection
AI总结:
本文提出基于强化学习和Boustrophedon扫描的轮廓测量传感器检测轨迹优化方法,通过PPO训练智能体动态调整传感器位姿与间距,实现均匀高质量表面扫描。
摘要:
制造业中的高精度表面缺陷检测对于确保质量控制至关重要。激光三角测量轮廓传感器是这一过程的关键,能够沿一条线提供详细且精确的表面测量。为了实现完整而精确的表面扫描,需要传感器与工件之间精确的相对运动。控制传感器位姿以保持与表面的最佳距离和相对取向至关重要。同时,确保整个扫描过程中轮廓分布均匀也很重要。本文提出了一种新颖的基于强化学习(RL)的方法,用于优化轮廓测量传感器的机器人检测轨迹。在Boustrophedon扫描方法的基础上,我们的技术动态调整传感器的位置和倾斜角度,以保持与表面的最佳取向和距离,同时确保一致的轮廓间距,从而实现均匀且高质量的扫描。利用基于零件CAD模型的仿真环境,我们复现了真实世界的扫描条件,包括传感器噪声和表面不规则性。这种基于仿真的方法能够基于CAD模型进行离线轨迹规划。关键贡献包括针对使用轮廓测量传感器的检测应用专门设计的状态空间、动作空间和奖励函数建模。我们使用近端策略优化(PPO)算法高效训练强化学习智能体,展示了其优化轮廓测量传感器检测轨迹的能力。为了验证我们的方法,我们进行了多项实验,将在特定训练件上训练的模型在仿真中测试于各种不同零件上。此外,我们还进行了一项真实世界实验,通过执行从CAD模型离线生成的优化轨迹,使用UR3e机械臂模型检测一个零件。
英文摘要:
High-precision surface defect detection in manufacturing is essential for ensuring quality control. Laser triangulation profilometric sensors are key to this process, providing detailed and accurate surface measurements over a line. To achieve a complete and precise surface scan, accurate relative motion between the sensor and the workpiece is required. It is crucial to control the sensor pose to maintain optimal distance and relative orientation to the surface. It is also important to ensure uniform profile distribution throughout the scanning process. This paper presents a novel Reinforcement Learning (RL) based approach to optimize robot inspection trajectories for profilometric sensors. Building upon the Boustrophedon scanning method, our technique dynamically adjusts the sensor position and tilt to maintain optimal orientation and distance from the surface, while also ensuring a consistent profile distance for uniform and high-quality scanning. Utilizing a simulated environment based on the CAD model of the part, we replicate real-world scanning conditions, including sensor noise and surface irregularities. This simulation-based approach enables offline trajectory planning based on CAD models. Key contributions include the modeling of the state space, action space, and reward function, specifically designed for inspection applications using profilometric sensors. We use Proximal Policy Optimization (PPO) algorithm to efficiently train the RL agent, demonstrating its capability to optimize inspection trajectories with profilometric sensors. To validate our approach, we conducted several experiments where a model trained on a specific training piece was tested on various parts in simulation. Also, we conducted a real-world experiment by executing the optimized trajectory, generated offline from a CAD model, to inspect a part using a UR3e robotic arm model.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。