通过热压兆帕级压力实现塑性晶体热导率的超高各向异性
Achieving ultra-high anisotropy in thermal conductivity of plastic crystal through megapascal pressure of hot pressing
AI总结:
本研究通过热压兆帕级压力使[(CH3)4N][FeCl4]塑性晶体薄膜沿(002)晶面择优取向,在16 MPa下实现面内/面间热导率比达5.5的超高各向异性,为柔性电子热管理提供了新途径。
摘要:
塑性晶体因其优异的性能,正逐渐在固态制冷和铁电领域得到应用。然而,其固有的低热导率限制了它们在电子器件中的使用。本研究证明,施加热压的兆帕级压力可以提升塑性晶体薄膜的热导率。最重要的是,它诱导了显著的热导率各向异性。这种热导率各向异性有利于专门的热管理应用,例如在电子器件中引导热流路径。在本研究中,通过热压制备了[(CH3)4N][FeCl4]塑性晶体薄膜。在16 MPa的压力下,薄膜的面内与面间热导率之比达到了显著的5.5。这归因于单轴压力诱导的沿(002)晶面的择优取向,从而形成了层状结构,并生成了平坦致密的薄膜。此外,根据分子动力学模拟,沿[100]和[010]方向(平行于(002)晶面)的热导率高于其他方向。因此,通过施加单轴热压压力,在[(CH3)4N][FeCl4]薄膜中实现了热导率各向异性的显著调控。这一现象有潜力极大地拓宽塑性晶体在柔性电子器件领域的应用。
英文摘要:
Plastic crystals, owing to their exceptional properties, are gradually finding applications in solid-state refrigeration and ferroelectric fields. However, their inherently low thermal conductivity restricts their utilization in electronic devices. This study demonstrates that applying megapascal pressure of hot pressing can enhance the thermal conductivity of plastic crystal films. Most importantly, it induces significant anisotropy in thermal conductivity. Such anisotropy in thermal conductivity is beneficial for specialized thermal management applications, such as directing heat flow paths in electronic devices. In this study, [(CH3)4N][FeCl4] PCs films were prepared by hot pressing. At a pressure of 16 MPa, the ratio of in-plane to cross-plane thermal conductivity in the film reaches a remarkable 5.5. This is attributed to the preferential orientation along the (002) crystal plane induced by uniaxial pressure, leading to the formation of a layered structure and the creation of a flat and dense film. Furthermore, according to molecular dynamics simulations, the thermal conductivity along the [100] and [010] directions (parallel to the (002) crystal plane) is higher than in other directions. Therefore, significant modulation of anisotropy in thermal conductivity is achieved in [(CH3)4N][FeCl4] films by applying uniaxial hot pressing pressure. This phenomenon has the potential to greatly broaden the application of plastic crystals in the field of flexible electronic devices.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。