The importance of Non-Intrusive Load Monitoring (NILM) has been increasingly recognized, given that NILM can enhance energy awareness and provide valuable insights for energy program design. Many existing NILM methods often rely on specialized devices to retrieve high-sampling complex signal data and focus on the high consumption appliances, hindering their applicability in real-world applications, especially when smart meters only provide low-resolution active power readings for households. In this paper, we propose a new approach using easily accessible weather data to achieve load disaggregation for a total of 12 appliances, encompassing both high and low consumption, in scenarios with very low sampling rates (hourly). Moreover, We develop a federated learning (FL) model that builds upon a sequence-to-sequence model to fulfil load disaggregation without data sharing. Our experiments demonstrate that the FL framework - L2GD can effectively handle statistical heterogeneity and avoid overfitting problems. By incorporating weather data, our approach significantly improves the performance of NILM.
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Lawrence Berkeley National Laboratory（劳伦斯伯克利国家实验室）
We consider the problem of learning the energy disaggregation signals for residential load data. Such task is referred as non-intrusive load monitoring (NILM), and in order to find individual devices' power consumption profiles based on aggregated meter measurements, a machine learning model is usually trained based on large amount of training data coming from a number of residential homes. Yet collecting such residential load datasets require both huge efforts and customers' approval on sharing metering data, while load data coming from different regions or electricity users may exhibit heter…
Privacy-Preserving Personalized Federated Learning for Distributed Photovoltaic Disaggregation under Statistical Heterogeneity
School of Computer Science and Engineering, University of Electronic Science and Technology of China（电子科技大学计算机科学与工程学院）；Department of Data Science and AI, Faculty of IT and Monash Energy Institute, Monash University（墨尔本大学数据科学与人工智能系）；Shenzhen Institute for Advanced Study of UESTC（电子科技大学深圳研究院）
University of Hertfordshire（赫特福德大学）；Leeds Beckett University（利兹贝克特大学）
Smart meters are used to measure the energy consumption of households. Specifically, within the energy consumption task smart meter have been used for load forecasting, reduction of consumer bills as well as reduction of grid distortions. Except energy consumption smart meters can be used to disaggregate energy consumption on device level. In this paper we investigate the potential of identifying the multimedia content played by a TV or monitor device using the central house's smart meter measuring the aggregated energy consumption from all working appliances of the household. The proposed arc…
Rooftop solar photovoltaic (PV) power generator is a widely used distributed energy resource (DER) in distribution systems. Currently, the majority of PVs are installed behind-the-meter (BTM), where only customers' net demand is recorded by smart meters. Disaggregating BTM PV generation from net demand is critical to utilities for enhancing grid-edge observability. In this paper, a data-driven approach is proposed for BTM PV generation disaggregation using solar and demand exemplars. First, a data clustering procedure is developed to construct a library of candidate load/solar exemplars. To ha…
Residential smart meters have been widely installed in urban houses nationwide to provide efficient and responsive monitoring and billing for consumers. Studies have shown that providing customers with device-level usage information can lead consumers to economize significant amounts of energy, while modern smart meters can only provide informative whole-home data with low resolution. Thus, energy disaggregation research which aims to decompose the aggregated energy consumption data into its component appliances has attracted broad attention. In this paper, a discriminative disaggregation mode…
In the residential sector, electric water heaters are appliances with a relatively high power consumption and a significant thermal inertia, which is particularly suitable for Demand Response schemes. The success of efficient DR schemes via the control of water heaters presupposes an accurate estimate of their power demand at each instant. Although the load of water heaters is rarely directly measured, a large penetration of Smart Meters (SMs) in distribution grids enables to indirectly infer this information on a large scale via load disaggregation. For that purpose, a considerable number of …
Adoption of smart meters is a major milestone on the path of European transition to smart energy. The residential sector in France represents $\approx$35\% of electricity consumption with $\approx$40\% (INSEE) of households using electrical heating. The number of deployed smart meters Linky is expected to reach 35M in 2021. In this manuscript we present an analysis of 676 households with an observation period of at least 6 months, for which we have metadata, such as the year of construction and the type of heating and propose a Bayesian model of the electrical consumption conditioned on temper…
Energy disaggregation is the task of segregating the aggregate energy of the entire building (as logged by the smartmeter) into the energy consumed by individual appliances. This is a single channel (the only channel being the smart-meter) blind source (different electrical appliances) separation problem. In recent times dictionary learning based approaches have shown promise in addressing the disaggregation problem. The usual technique is to learn a dictionary for every device and use the learnt dictionaries as basis for blind source separation during disaggregation. Dictionary learning is a …
The housing structures have changed with urbanization and the growth due to the construction of high-rise buildings all around the world requires end-use appliance energy conservation and management in real-time. This shift also came along with smart-meters which enabled the estimation of appliance-specific power consumption from the buildings aggregate power consumption reading. Non-intrusive load monitoring (NILM) or energy disaggregation is aimed at separating the household energy measured at the aggregate level into constituent appliances. Over the years, signal processing and machine lear…
Energy Injection Identification enabled Disaggregation with Deep Multi-Task Learning
The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））；The Hong Kong University of Science（香港科学大学）；Southern University of Science（南方科技大学）；University of Cambridge（剑桥大学）
Energy disaggregation, known in the literature as Non-Intrusive Load Monitoring (NILM), is the task of inferring the power demand of the individual appliances given the aggregate power demand recorded by a single smart meter which monitors multiple appliances. In this paper, we propose a deep neural network that combines a regression subnetwork with a classification subnetwork for solving the NILM problem. Specifically, we improve the generalization capability of the overall architecture by including an encoder-decoder with a tailored attention mechanism in the regression subnetwork. The atten…
University of Surrey（萨里大学）；VU University Amsterdam（阿姆斯特丹自由大学）
Energy disaggregation, a.k.a. Non-Intrusive Load Monitoring, aims to separate the energy consumption of individual appliances from the readings of a mains power meter measuring the total energy consumption of, e.g. a whole house. Energy consumption of individual appliances can be useful in many applications, e.g., providing appliance-level feedback to the end users to help them understand their energy consumption and ultimately save energy. Recently, with the availability of large-scale energy consumption datasets, various neural network models such as convolutional neural networks and recurre…
Energy disaggregation is the task of segregating the aggregate energy of the entire building (as logged by the smartmeter) into the energy consumed by individual appliances. This is a single channel (the only channel being the smart-meter) blind source (different electrical appliances) separation problem. The traditional way to address this is via stochastic finite state machines (e.g. Factorial Hidden Markov Model). In recent times dictionary learning based approaches have shown promise in addressing the disaggregation problem. The usual technique is to learn a dictionary for every device and…
Customer-level rooftop photovoltaic (PV) has been widely integrated into distribution systems. In most cases, PVs are installed behind-the-meter (BTM), and only the net demand is recorded. Therefore, the native demand and PV generation are unknown to utilities. Separating native demand and solar generation from net demand is critical for improving grid-edge observability. In this paper, a novel approach is proposed for disaggregating customer-level BTM PV generation using low-resolution but widely available hourly smart meter data. The proposed approach exploits the strong correlation between …
The analysis of load curves collected from smart meters is a key step for many energy management tasks ranging from consumption forecasting to customers characterization and load monitoring. In this contribution, we propose a model based on a functional formulation of nonnegative tensor factorization and derive updates for the corresponding optimization problem. We show on the concrete example of multi-sites load curves disaggregation how this formulation is helpful for 1) exhibiting smooth intraday consumption patterns and 2) taking into account external variables such as the outside temperat…
Deep learning models for non-intrusive load monitoring (NILM) tend to require a large amount of labeled data for training. However, it is difficult to generalize the trained models to unseen sites due to different load characteristics and operating patterns of appliances between data sets. For addressing such problems, self-supervised learning (SSL) is proposed in this paper, where labeled appliance-level data from the target data set or house is not required. Initially, only the aggregate power readings from target data set are required to pre-train a general network via a self-supervised pre…
Energy disaggregation estimates appliance-by-appliance electricity consumption from a single meter that measures the whole home's electricity demand. Compared with intrusive load monitoring, NILM (Non-intrusive load monitoring) is low cost, easy to deploy, and flexible. In this paper, we propose a new method, coined IMG-NILM, that utilises convolutional neural networks (CNN) to disaggregate electricity data represented as images. Instead of the traditional approach of dealing with electricity data as time series, IMG-NILM transforms time series into heatmaps with higher electricity readings po…
Tsinghua University（清华大学）；University of California, Santa Cruz（加州大学圣克鲁兹分校）；ETH Zürich（苏黎世联邦理工学院）
Non-intrusive load monitoring addresses the challenging task of decomposing the aggregate signal of a household's electricity consumption into appliance-level data without installing dedicated meters. By detecting load malfunction and recommending energy reduction programs, cost-effective non-intrusive load monitoring provides intelligent demand-side management for utilities and end users. In this paper, we boost the accuracy of energy disaggregation with a novel neural network structure named scale- and context-aware network, which exploits multi-scale features and contextual information. Spe…
Ask for Any Appliance: A Prompt-Programmable Foundation Model for Non-Intrusive Load Monitoring
The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳））；The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Southern University of Science and Technology（南方科技大学）
