基于储存环的引力波天文台概念研究:引力波应变与同步辐射噪声
Concept Study of a Storage Ring-based Gravitational Wave Observatory: Gravitational Wave Strain and Synchrotron Radiation Noise
AI总结:
本研究首次探讨基于储存环的毫赫兹引力波探测器可行性,聚焦相对论离子的同步辐射散粒噪声,通过LHC周长储存环的离子模拟与解析计算,证明该设计可将对应频段噪声降至天体引力波信号的1/10至1/100,为后续完整实验装置提供原理基础。
摘要:
本工作首次探讨了利用基于储存环的探测器测量毫赫兹引力波(mHz GWs)的可行性。尽管这一整体挑战包含若干子问题,但本文仅聚焦于量化相对论速度下循环离子的动能与辐射功率所带来的设计限制。我们提出了一种基于测量离子链飞行时间信号的实验方案。这类引力波探测器测量原理固有的主要噪声源之一是所发射同步辐射的散粒噪声。我们通过解析估算与离子模拟,计算了在周长为大型强子对撞机(LHC)的储存环中循环的不同质量、不同速度离子的到达时间信号的噪声幅度。由此我们表明,我们的实验设计可将10^-4至10^-2 Hz频率范围内由同步辐射导致的噪声幅度降低至比天体物理源(如超大质量双黑洞或极端质量比旋近)的预期引力波信号低一到两个数量级的水平。构建可用的基于储存环的引力波探测器的其他关键要求包括:产生并加速具有所需能量分辨率的重离子链、它们的注入与持续储存,以及用于测定粒子到达时间的探测方法。不过这些并非本文工作的重点,本文反而专注于从离子类型、动能和储存环设计角度定义一种可行原理,该原理后续将作为研究更完整实验装置的起点。
英文摘要:
This work for the first time addresses the feasibility of measuring millihertz gravitational waves (mHz GWs) with a storage ring-based detector. While this overall challenge consists of several partial problems, here we focus solely on quantifying design limitations imposed by the kinetic energy and radiated power of circulating ions at relativistic velocities. We propose an experiment based on the measurement of the time-of-flight signal of an ion chain. One of the dominant noise sources inherent to the measurement principle for such a GW detector is the shot noise of the emitted synchrotron radiation. We compute the noise amplitude of arrival time signals obtained by analytical estimates and simulations of ions with different masses and velocities circulating in a storage ring with the circumference of the Large Hadron Collider (LHC). Thereby, we show that our experiment design could reduce the noise amplitude due to the synchrotron radiation in the frequency range $10^{-4} - 10^{-2}$ Hz to one or two orders of magnitude below the expected GW signals from of astrophysical sources, such as super-massive binary black holes or extreme mass-ratio inspirals. Other key requirements for building a working storage ring-based GW detector include the generation and acceleration of heavy ion chains with the required energy resolution, their injection and continued storage, as well as the detection method to be used for the determination of the particle arrival time. However, these are not the focus of the work presented here, in which we instead concentrate on the definition of a working principle in terms of ion type, kinetic energy, and ring design, which will later serve as a starting point when addressing a more complete experimental setup.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。