LLM-3D Print: 大型语言模型用于监控和控制3D打印
LLM-3D Print: Large Language Models To Monitor and Control 3D Printing
AI总结:
利用大型语言模型监控和控制3D打印过程,自动识别和纠正打印缺陷,提升产品质量与生产效率。
摘要:
工业4.0通过推动数字化将制造业革命化,并将范式转向增材制造(AM)。熔融沉积建模(FDM)作为一种关键技术,通过逐层挤出实现高度定制、低成本的产品制造,同时减少材料浪费,对传统减材方法构成重大挑战。然而,材料挤出技术对误差的敏感性往往需要专家干预以检测和缓解可能严重损害产品质量的缺陷。尽管存在自动误差检测和机器学习模型,但其在不同3D打印机设置、固件和传感器上的通用性有限,而深度学习方法需要大量标记数据集,限制了可扩展性和适应性。为了解决这些挑战,我们提出了一种过程监控和控制框架,利用预训练的大型语言模型(LLMs)与3D打印机结合,以检测和解决打印缺陷。LLM通过分析每次层或打印段后捕获的图像,识别故障模式并查询打印机获取相关参数。然后生成并执行纠正计划。我们通过将其与具有不同AM专业知识的工程师控制组进行比较,验证了所提框架在识别缺陷的有效性。我们的评估表明,基于LLM的代理不仅能够准确识别常见的3D打印错误,如不一致的挤出、丝状物、变形和层附着力,还能有效确定导致这些失败的参数,并在无需人工干预的情况下自主纠正。
英文摘要:
Industry 4.0 has revolutionized manufacturing by driving digitalization and shifting the paradigm toward additive manufacturing (AM). Fused Deposition Modeling (FDM), a key AM technology, enables the creation of highly customized, cost-effective products with minimal material waste through layer-by-layer extrusion, posing a significant challenge to traditional subtractive methods. However, the susceptibility of material extrusion techniques to errors often requires expert intervention to detect and mitigate defects that can severely compromise product quality. While automated error detection and machine learning models exist, their generalizability across diverse 3D printer setups, firmware, and sensors is limited, and deep learning methods require extensive labeled datasets, hindering scalability and adaptability. To address these challenges, we present a process monitoring and control framework that leverages pre-trained Large Language Models (LLMs) alongside 3D printers to detect and address printing defects. The LLM evaluates print quality by analyzing images captured after each layer or print segment, identifying failure modes and querying the printer for relevant parameters. It then generates and executes a corrective action plan. We validated the effectiveness of the proposed framework in identifying defects by comparing it against a control group of engineers with diverse AM expertise. Our evaluation demonstrated that LLM-based agents not only accurately identify common 3D printing errors, such as inconsistent extrusion, stringing, warping, and layer adhesion, but also effectively determine the parameters causing these failures and autonomously correct them without any need for human intervention.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。