3D point clouds are essential for perceiving outdoor scenes, especially within the realm of autonomous driving. Recent advances in 3D LiDAR Object Detection focus primarily on the spatial positioning and distribution of points to ensure accurate detection. However, despite their robust performance in variable conditions, these methods are hindered by their sole reliance on coordinates and point intensity, resulting in inadequate isometric invariance and suboptimal detection outcomes. To tackle this challenge, our work introduces Transformation-Invariant Local (TraIL) features and the associated TraIL-Det architecture. Our TraIL features exhibit rigid transformation invariance and effectively adapt to variations in point density, with a design focus on capturing the localized geometry of neighboring structures. They utilize the inherent isotropic radiation of LiDAR to enhance local representation, improve computational efficiency, and boost detection performance. To effectively process the geometric relations among points within each proposal, we propose a Multi-head self-Attention Encoder (MAE) with asymmetric geometric features to encode high-dimensional TraIL features into manageable representations. Our method outperforms contemporary self-supervised 3D object detection approaches in terms of mAP on KITTI (67.8, 20% label, moderate) and Waymo (68.9, 20% label, moderate) datasets under various label ratios (20%, 50%, and 100%).
LiDAR has become one of the primary 3D object detection sensors in autonomous driving. However, LiDAR's diverging point pattern with increasing distance results in a non-uniform sampled point cloud ill-suited to discretized volumetric feature extraction. Current methods either rely on voxelized point clouds or use inefficient farthest point sampling to mitigate detrimental effects caused by density variation but largely ignore point density as a feature and its predictable relationship with distance from the LiDAR sensor. Our proposed solution, Point Density-Aware Voxel network (PDV), is an en…
In this paper, we describe a strategy for training neural networks for object detection in range images obtained from one type of LiDAR sensor using labeled data from a different type of LiDAR sensor. Additionally, an efficient model for object detection in range images for use in self-driving cars is presented. Currently, the highest performing algorithms for object detection from LiDAR measurements are based on neural networks. Training these networks using supervised learning requires large annotated datasets. Therefore, most research using neural networks for object detection from LiDAR po…
National Robotics Engineering Center（国家机器人工程中心）；Carnegie Mellon University（卡内基梅隆大学）
As object detectors rapidly improve, attention has expanded past image-only networks to include a range of 3D and multimodal frameworks, especially ones that incorporate LiDAR. However, due to cost, logistics, and even some safety considerations, stereo can be an appealing alternative. Towards understanding the efficacy of stereo as a replacement for monocular input or LiDAR in object detectors, we show that multimodal learning with traditional disparity algorithms can improve image-based results without increasing the number of parameters, and that learning over stereo error can impart simila…
Robert Bosch GmbH（罗伯特·博世有限公司）；Ulm University（乌尔姆大学）；KTH Royal Institute of Technology（瑞典皇家理工学院）
Training a deep object detector for autonomous driving requires a huge amount of labeled data. While recording data via on-board sensors such as camera or LiDAR is relatively easy, annotating data is very tedious and time-consuming, especially when dealing with 3D LiDAR points or radar data. Active learning has the potential to minimize human annotation efforts while maximizing the object detector's performance. In this work, we propose an active learning method to train a LiDAR 3D object detector with the least amount of labeled training data necessary. The detector leverages 2D region propos…
This paper tackles the 3D object detection problem, which is of vital importance for applications such as autonomous driving. Our framework uses a Machine Learning (ML) pipeline on a combination of monocular camera and LiDAR data to detect vehicles in the surrounding 3D space of a moving platform. It uses frustum region proposals generated by State-Of-The-Art (SOTA) 2D object detectors to segment LiDAR point clouds into point clusters which represent potentially individual objects. We evaluate the performance of classical ML algorithms as part of an holistic pipeline for estimating the paramet…
Light Detection And Ranging (LiDAR) has been widely used in autonomous vehicles for perception and localization. However, the cost of a high-resolution LiDAR is still prohibitively expensive, while its low-resolution counterpart is much more affordable. Therefore, using low-resolution LiDAR for autonomous driving is an economically viable solution, but the point cloud sparsity makes it extremely challenging. In this paper, we propose a two-stage neural network framework that enables 3D object detection using a low-resolution LiDAR. Taking input from a low-resolution LiDAR point cloud and a mon…
We propose DeepFusion, a modular multi-modal architecture to fuse lidars, cameras and radars in different combinations for 3D object detection. Specialized feature extractors take advantage of each modality and can be exchanged easily, making the approach simple and flexible. Extracted features are transformed into bird's-eye-view as a common representation for fusion. Spatial and semantic alignment is performed prior to fusing modalities in the feature space. Finally, a detection head exploits rich multi-modal features for improved 3D detection performance. Experimental results for lidar-came…
Carnegie Mellon University（卡内基梅隆大学）；Amazon（亚马逊）；University of Southern California（南加州大学）
The past few years have witnessed an increasing interest in improving the perception performance of LiDARs on autonomous vehicles. While most of the existing works focus on developing new deep learning algorithms or model architectures, we study the problem from the physical design perspective, i.e., how different placements of multiple LiDARs influence the learning-based perception. To this end, we introduce an easy-to-compute information-theoretic surrogate metric to quantitatively and fast evaluate LiDAR placement for 3D detection of different types of objects. We also present a new data co…
Person detection is a crucial task for mobile robots navigating in human-populated environments. LiDAR sensors are promising for this task, thanks to their accurate depth measurements and large field of view. Two types of LiDAR sensors exist: the 2D LiDAR sensors, which scan a single plane, and the 3D LiDAR sensors, which scan multiple planes, thus forming a volume. How do they compare for the task of person detection? To answer this, we conduct a series of experiments, using the public, large-scale JackRabbot dataset and the state-of-the-art 2D and 3D LiDAR-based person detectors (DR-SPAAM an…
ETH Zürich（苏黎世联邦理工学院）；Princeton University（普林斯顿大学）；MPI for Informatics（马克斯·普朗克信息学研究所）；KU Leuven（鲁汶大学）
3D object detection is a central task for applications such as autonomous driving, in which the system needs to localize and classify surrounding traffic agents, even in the presence of adverse weather. In this paper, we address the problem of LiDAR-based 3D object detection under snowfall. Due to the difficulty of collecting and annotating training data in this setting, we propose a physically based method to simulate the effect of snowfall on real clear-weather LiDAR point clouds. Our method samples snow particles in 2D space for each LiDAR line and uses the induced geometry to modify the me…
The goal of this paper is to classify objects mapped by LiDAR sensor into different classes such as vehicles, pedestrians and bikers. Utilizing a LiDAR-based object detector and Neural Networks-based classifier, a novel real-time object detection is presented essentially with respect to aid self-driving vehicles in recognizing and classifying other objects encountered in the course of driving and proceed accordingly. We discuss our work using machine learning methods to tackle a common high-level problem found in machine learning applications for self-driving cars: the classification of pointc…
Instituto de Telecomunicações（电信研究所）；ISCTE-Instituto Universitário de Lisboa（里斯本大学学院）；CTS-UNINOVA
This paper presents a monocular vision system susceptible of being installed in unmanned small and medium-sized aerial vehicles built to perform missions in forest environments (e.g., search and rescue). The proposed system extends a previous monocular-based technique for trail detection and tracking so as to take into account volumetric data acquired from a Visual SLAM algorithm and, as a result, to increase its sturdiness upon challenging trails. The experimental results, obtained via a set of 12 videos recorded with a camera installed in a tele-operated, unmanned small-sized aerial vehicle,…
Beijing National Research Center for Information Science and Technology（北京信息科学与技术国家研究中心）；Tsinghua University（清华大学）；Gaussian Robotics（高仙机器人）
In this paper, we propose the LiDAR Distillation to bridge the domain gap induced by different LiDAR beams for 3D object detection. In many real-world applications, the LiDAR points used by mass-produced robots and vehicles usually have fewer beams than that in large-scale public datasets. Moreover, as the LiDARs are upgraded to other product models with different beam amount, it becomes challenging to utilize the labeled data captured by previous versions' high-resolution sensors. Despite the recent progress on domain adaptive 3D detection, most methods struggle to eliminate the beam-induced …
This paper presents a novel method for pedestrian detection and tracking by fusing camera and LiDAR sensor data. To deal with the challenges associated with the autonomous driving scenarios, an integrated tracking and detection framework is proposed. The detection phase is performed by converting LiDAR streams to computationally tractable depth images, and then, a deep neural network is developed to identify pedestrian candidates both in RGB and depth images. To provide accurate information, the detection phase is further enhanced by fusing multi-modal sensor information using the Kalman filte…
Ground surface detection in point cloud is widely used as a key module in autonomous driving systems. Different from previous approaches which are mostly developed for lidars with high beam resolution, e.g. Velodyne HDL-64, this paper proposes ground detection techniques applicable to much sparser point cloud captured by lidars with low beam resolution, e.g. Velodyne VLP-16. The approach is based on the RANSAC scheme of plane fitting. Inlier verification for plane hypotheses is enhanced by exploiting the point-wise tangent, which is a local feature available to compute regardless of the densit…
University of California, Berkeley（加利福尼亚大学伯克利分校）；Department of Mechanical Engineering（机械工程系）
We propose a new method for fusing a LIDAR point cloud and camera-captured images in the deep convolutional neural network (CNN). The proposed method constructs a new layer called non-homogeneous pooling layer to transform features between bird view map and front view map. The sparse LIDAR point cloud is used to construct the mapping between the two maps. The pooling layer allows efficient fusion of the bird view and front view features at any stage of the network. This is favorable for the 3D-object detection using camera-LIDAR fusion in autonomous driving scenarios. A corresponding deep CNN …
The University of Adelaide（阿德莱德大学）；Northwestern Polytechnical University（西北工业大学）；Intellifusion（云天励飞）
Road detection is a critically important task for self-driving cars. By employing LiDAR data, recent works have significantly improved the accuracy of road detection. Relying on LiDAR sensors limits the wide application of those methods when only cameras are available. In this paper, we propose a novel road detection approach with RGB being the only input during inference. Specifically, we exploit pseudo-LiDAR using depth estimation, and propose a feature fusion network where RGB and learned depth information are fused for improved road detection. To further optimize the network structure and …
LiDAR (Light Detection and Ranging) is an advanced active remote sensing technique working on the principle of time of travel (ToT) for capturing highly accurate 3D information of the surroundings. LiDAR has gained wide attention in research and development with the LiDAR industry expected to reach 2.8 billion $ by 2025. Although the LiDAR dataset is of rich density and high spatial resolution, it is challenging to process LiDAR data due to its inherent 3D geometry and massive volume. But such a high-resolution dataset possesses immense potential in many applications and has great potential in…
The Hong Kong University of Science and Technology（香港科技大学）；Huawei Technologies（华为技术有限公司）
Extrinsic perturbation always exists in multiple sensors. In this paper, we focus on the extrinsic uncertainty in multi-LiDAR systems for 3D object detection. We first analyze the influence of extrinsic perturbation on geometric tasks with two basic examples. To minimize the detrimental effect of extrinsic perturbation, we propagate an uncertainty prior on each point of input point clouds, and use this information to boost an approach for 3D geometric tasks. Then we extend our findings to propose a multi-LiDAR 3D object detector called MLOD. MLOD is a two-stage network where the multi-LiDAR in…
Modern autonomous vehicles rely heavily on mechanical LiDARs for perception. Current perception methods generally require 360° point clouds, collected sequentially as the LiDAR scans the azimuth and acquires consecutive wedge-shaped slices. The acquisition latency of a full scan (~ 100ms) may lead to outdated perception which is detrimental to safe operation. Recent streaming perception works proposed directly processing LiDAR slices and compensating for the narrow field of view (FOV) of a slice by reusing features from preceding slices. These works, however, are all based on a single modality…
Most autonomous vehicles are equipped with LiDAR sensors and stereo cameras. The former is very accurate but generates sparse data, whereas the latter is dense, has rich texture and color information but difficult to extract robust 3D representations from. In this paper, we propose a novel data fusion algorithm to combine accurate point clouds with dense but less accurate point clouds obtained from stereo pairs. We develop a framework to integrate this algorithm into various 3D object detection methods. Our framework starts with 2D detections from both of the RGB images, calculates frustums an…
Artificial Satellite Trails Detection Using U-Net Deep Neural Network and Line Segment Detector Algorithm
School of Physics and Astronomy, China West Normal University（物理与天文学院，西南大学）；National Astronomical Observatories, Chinese Academy of Sciences（国家天文台，中国科学院）；School of Astronomy and Space Science, University of Chinese Academy of Sciences（天文与空间科学学院，中国科学院大学）；Shandong Provincial Key Laboratory of Optical Astronomy and Solar-Terrestrial Environment, School of Space Science and Technology, Institute of Space Sciences, Shandong University（山东省光学天文与太阳-地球环境重点实验室，空间科学与技术学院，空间科学研究院，山东大学）
Enhancing Lidar-based Object Detection in Adverse Weather using Offset Sequences in Time
Institute for Automotive Engineering RWTH Aachen University（亚琛工业大学汽车工程研究所）；Institute of Imaging and Computer Vision RWTH Aachen University（亚琛工业大学图像与计算机视觉研究所）
University of Waterloo（滑铁卢大学）；University of Toronto（多伦多大学）
The estimation of uncertainty in robotic vision, such as 3D object detection, is an essential component in developing safe autonomous systems aware of their own performance. However, the deployment of current uncertainty estimation methods in 3D object detection remains challenging due to timing and computational constraints. To tackle this issue, we propose LiDAR-MIMO, an adaptation of the multi-input multi-output (MIMO) uncertainty estimation method to the LiDAR-based 3D object detection task. Our method modifies the original MIMO by performing multi-input at the feature level to ensure the …
In this paper, we propose a new deep architecture for fusing camera and LiDAR sensors for 3D object detection. Because the camera and LiDAR sensor signals have different characteristics and distributions, fusing these two modalities is expected to improve both the accuracy and robustness of 3D object detection. One of the challenges presented by the fusion of cameras and LiDAR is that the spatial feature maps obtained from each modality are represented by significantly different views in the camera and world coordinates; hence, it is not an easy task to combine two heterogeneous feature maps w…
LiDARs play a critical role in Autonomous Vehicles' (AVs) perception and their safe operations. Recent works have demonstrated that it is possible to spoof LiDAR return signals to elicit fake objects. In this work we demonstrate how the same physical capabilities can be used to mount a new, even more dangerous class of attacks, namely Object Removal Attacks (ORAs). ORAs aim to force 3D object detectors to fail. We leverage the default setting of LiDARs that record a single return signal per direction to perturb point clouds in the region of interest (RoI) of 3D objects. By injecting illegitima…
Autonomous vehicles rely on their perception systems to acquire information about their immediate surroundings. It is necessary to detect the presence of other vehicles, pedestrians and other relevant entities. Safety concerns and the need for accurate estimations have led to the introduction of Light Detection and Ranging (LiDAR) systems in complement to the camera or radar-based perception systems. This article presents a review of state-of-the-art automotive LiDAR technologies and the perception algorithms used with those technologies. LiDAR systems are introduced first by analyzing the mai…
TuSimple（图森未来）；University of Central Florida（中佛罗里达大学）
This technical report presents the 1st place winning solution for the Waymo Open Dataset 3D semantic segmentation challenge 2022. Our network, termed LidarMultiNet, unifies the major LiDAR perception tasks such as 3D semantic segmentation, object detection, and panoptic segmentation in a single framework. At the core of LidarMultiNet is a strong 3D voxel-based encoder-decoder network with a novel Global Context Pooling (GCP) module extracting global contextual features from a LiDAR frame to complement its local features. An optional second stage is proposed to refine the first-stage segmentati…
Duke University（杜克大学）；Volvo Car Technology USA（沃尔沃汽车美国技术公司）
LiDAR-based 3D object detection plays a crucial role in modern autonomous driving systems. LiDAR data often exhibit severe changes in properties across different observation ranges. In this paper, we explore cross-range adaptation for 3D object detection using LiDAR, i.e., far-range observations are adapted to near-range. This way, far-range detection is optimized for similar performance to near-range one. We adopt a bird-eyes view (BEV) detection framework to perform the proposed model adaptation. Our model adaptation consists of an adversarial global adaptation, and a fine-grained local adap…
University of Toronto Institute for Aerospace Studies（多伦多大学航空航天研究所）
This paper presents a model-free, setting-independent method for online detection of dynamic objects in 3D lidar data. We explicitly compensate for the moving-while-scanning operation (motion distortion) of present-day 3D spinning lidar sensors. Our detection method uses a motion-compensated freespace querying algorithm and classifies between dynamic (currently moving) and static (currently stationary) labels at the point level. For a quantitative analysis, we establish a benchmark with motion-distorted lidar data using CARLA, an open-source simulator for autonomous driving research. We also p…
We present a method for detecting and mapping trees in noisy stereo camera point clouds, using a learned 3-D object detector. Inspired by recent advancements in 3-D object detection using a pseudo-lidar representation for stereo data, we train a PointRCNN detector to recognize trees in forest-like environments. We generate detector training data with a novel automatic labeling process that clusters a fused global point cloud. This process annotates large stereo point cloud training data sets with minimal user supervision, and unlike previous pseudo-lidar detection pipelines, requires no 3-D gr…
Data augmentations are important in training high-performance 3D object detectors for point clouds. Despite recent efforts on designing new data augmentations, perhaps surprisingly, most state-of-the-art 3D detectors only use a few simple data augmentations. In particular, different from 2D image data augmentations, 3D data augmentations need to account for different representations of input data and require being customized for different models, which introduces significant overhead. In this paper, we resort to a search-based approach, and propose LidarAugment, a practical and effective data …
LiDAR-based 3D detection in point cloud is essential in the perception system of autonomous driving. In this paper, we present LiDAR R-CNN, a second stage detector that can generally improve any existing 3D detector. To fulfill the real-time and high precision requirement in practice, we resort to point-based approach other than the popular voxel-based approach. However, we find an overlooked issue in previous work: Naively applying point-based methods like PointNet could make the learned features ignore the size of proposals. To this end, we analyze this problem in detail and propose several …
Cerema（法国路桥与道路研究中心）；Institut de Recherche en Informatique de Toulouse（图卢兹计算机科学研究所）；Université de Toulouse（图卢兹大学）；Universidad Carlos III de Madrid（马德里卡洛斯三世大学）；Queen Mary University of London（伦敦玛丽女王大学）
The ability to accurately detect and localize objects is recognized as being the most important for the perception of self-driving cars. From 2D to 3D object detection, the most difficult is to determine the distance from the ego-vehicle to objects. Expensive technology like LiDAR can provide a precise and accurate depth information, so most studies have tended to focus on this sensor showing a performance gap between LiDAR-based methods and camera-based methods. Although many authors have investigated how to fuse LiDAR with RGB cameras, as far as we know there are no studies to fuse LiDAR and…
Technical University of Munich（慕尼黑工业大学）；Sun Yat-sen University（中山大学）
The proposal of Pseudo-Lidar representation has significantly narrowed the gap between visual-based and active Lidar-based 3D object detection. However, current researches exclusively focus on pushing the accuracy improvement of Pseudo-Lidar by taking the advantage of complex and time-consuming neural networks. Seldom explore the profound characteristics of Pseudo-Lidar representation to obtain the promoting opportunities. In this paper, we dive deep into the pseudo Lidar representation and argue that the performance of 3D object detection is not fully dependent on the high precision stereo de…
LiDAR sensors can be used to obtain a wide range of measurement signals other than a simple 3D point cloud, and those signals can be leveraged to improve perception tasks like 3D object detection. A single laser pulse can be partially reflected by multiple objects along its path, resulting in multiple measurements called echoes. Multi-echo measurement can provide information about object contours and semi-transparent surfaces which can be used to better identify and locate objects. LiDAR can also measure surface reflectance (intensity of laser pulse return), as well as ambient light of the sce…
Hanyang University（汉阳大学）；Korea Advanced Institute of Science & Technology (KAIST)（韩国科学技术院（KAIST））
Fusing data from cameras and LiDAR sensors is an essential technique to achieve robust 3D object detection. One key challenge in camera-LiDAR fusion involves mitigating the large domain gap between the two sensors in terms of coordinates and data distribution when fusing their features. In this paper, we propose a novel camera-LiDAR fusion architecture called, 3D Dual-Fusion, which is designed to mitigate the gap between the feature representations of camera and LiDAR data. The proposed method fuses the features of the camera-view and 3D voxel-view domain and models their interactions through …
Remote sensing colour image semantic segmentation of trails created by large herbivorous Mammals
Department of Computer Engineering, Universidad de Burgos（巴尔多大学计算机工程系）；Biodiversity Research Institute, Spanish Research Council, University of Oviedo, Principado de Asturias（生物多样性研究机构、西班牙研究委员会、奥维多大学、阿斯图里亚斯公国）；School of Computer Science and Electronic Engineering, Bangor university（班戈大学计算机科学与电子工程学院）
For 3D object detection, labeling lidar point cloud is difficult, so data augmentation is an important module to make full use of precious annotated data. As a widely used data augmentation method, GT-sample effectively improves detection performance by inserting groundtruths into the lidar frame during training. However, these samples are often placed in unreasonable areas, which misleads model to learn the wrong context information between targets and backgrounds. To address this problem, in this paper, we propose a context-aware data augmentation method (CA-aug) , which ensures the reasonab…
LE2I-CNRS, University of Technology of Belfort-Montbéliard（法国国家科学研究中心LE2I实验室，贝尔福-蒙贝利亚尔技术大学）；University of Lincoln（林肯大学）
Human detection and tracking is an essential task for service robots, where the combined use of multiple sensors has potential advantages that are yet to be exploited. In this paper, we introduce a framework allowing a robot to learn a new 3D LiDAR-based human classifier from other sensors over time, taking advantage of a multisensor tracking system. The main innovation is the use of different detectors for existing sensors (i.e. RGB-D camera, 2D LiDAR) to train, online, a new 3D LiDAR-based human classifier, exploiting a so-called trajectory probability. Our framework uses this probability to…
While short range 3D pedestrian detection is sufficient for emergency breaking, long range detections are required for smooth breaking and gaining trust in autonomous vehicles. The current state-of-the-art on the KITTI benchmark performs suboptimal in detecting the position of pedestrians at long range. Thus, we propose an approach specifically targeting long range 3D pedestrian detection (LRPD), leveraging the density of RGB and the precision of LiDAR. Therefore, for proposals, RGB instance segmentation and LiDAR point based proposal generation are combined, followed by a second stage using b…
Understanding driving situations regardless the conditions of the traffic scene is a cornerstone on the path towards autonomous vehicles; however, despite common sensor setups already include complementary devices such as LiDAR or radar, most of the research on perception systems has traditionally focused on computer vision. We present a LiDAR-based 3D object detection pipeline entailing three stages. First, laser information is projected into a novel cell encoding for bird's eye view projection. Later, both object location on the plane and its heading are estimated through a convolutional neu…
Recent progress in 3D object detection from single images leverages monocular depth estimation as a way to produce 3D pointclouds, turning cameras into pseudo-lidar sensors. These two-stage detectors improve with the accuracy of the intermediate depth estimation network, which can itself be improved without manual labels via large-scale self-supervised learning. However, they tend to suffer from overfitting more than end-to-end methods, are more complex, and the gap with similar lidar-based detectors remains significant. In this work, we propose an end-to-end, single stage, monocular 3D object…
