arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2408.13532cs.CEcs.LG
收藏

基于FFT的拉胀超材料代理建模:实现有效弹性能的实时预测与快速逆向设计

FFT-based surrogate modeling of auxetic metamaterials with real-time prediction of effective elastic properties and swift inverse design

RWTH Aachen University(亚琛工业大学);ESI Group(ESI集团);ENSAM Institute of Technology(法国国立高等工程技术学院)

Hooman Danesh, Daniele Di Lorenzo, Francisco Chinesta, Stefanie Reese, Tim Brepols

AI总结:

本文提出基于FFT均匀化方法生成数据并开发代理模型,实时预测拉胀单胞的有效弹性常数,并构建逆向分析框架与图形用户界面,实现快速逆向设计。

摘要:

拉胀结构以其负泊松比而闻名,其有效弹性能在很大程度上受其底层结构几何形状和基础材料性能的影响。虽然拉胀单胞的周期性均匀化可用于研究这些性能,但其计算成本高昂,限制了设计空间的探索和逆向分析。本文开发了代理模型,用于实时预测具有不同形状正交孔隙的拉胀单胞的有效弹性能。这些单胞具有四种不同形状的正交孔隙,包括矩形、菱形、椭圆形和花生形孔隙,每种孔隙均由特定的孔隙直径表征。生成的代理模型接受几何参数和基础材料的弹性能作为输入,以实时预测有效弹性常数。这种快速评估实现了一个实用的逆向分析框架,用于获取产生所需有效响应的最佳设计参数。采用基于快速傅里叶变换(FFT)的均匀化方法来高效生成数据以开发代理模型,从而避免了通常与有限元法(FEM)相关的周期性网格生成和边界条件的担忧。通过训练/测试划分方法、参数研究和逆向问题,严格检验了所生成代理模型的性能。最后,开发了一个图形用户界面(GUI),提供对有效切线刚度的实时预测,并执行逆向分析以确定最佳几何参数。

英文摘要:

Auxetic structures, known for their negative Poisson's ratio, exhibit effective elastic properties heavily influenced by their underlying structural geometry and base material properties. While periodic homogenization of auxetic unit cells can be used to investigate these properties, it is computationally expensive and limits design space exploration and inverse analysis. In this paper, surrogate models are developed for the real-time prediction of the effective elastic properties of auxetic unit cells with orthogonal voids of different shapes. The unit cells feature orthogonal voids in four distinct shapes, including rectangular, diamond, oval, and peanut-shaped voids, each characterized by specific void diameters. The generated surrogate models accept geometric parameters and the elastic properties of the base material as inputs to predict the effective elastic constants in real-time. This rapid evaluation enables a practical inverse analysis framework for obtaining the optimal design parameters that yield the desired effective response. The fast Fourier transform (FFT)-based homogenization approach is adopted to efficiently generate data for developing the surrogate models, bypassing concerns about periodic mesh generation and boundary conditions typically associated with the finite element method (FEM). The performance of the generated surrogate models is rigorously examined through a train/test split methodology, a parametric study, and an inverse problem. Finally, a graphical user interface (GUI) is developed, offering real-time prediction of the effective tangent stiffness and performing inverse analysis to determine optimal geometric parameters.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑