用于WPT应用的加载4匝互补螺旋谐振器的低剖面超材料带通滤波器
Low Profile Metamaterial Band-Pass Filter Loaded with 4-Turn Complementary Spiral Resonator for WPT Applications
AI总结:
本文提出一种基于4匝互补螺旋谐振器的紧凑低损耗超材料带通滤波器,中心频率730 MHz,通过叉指电容改善阻带性能,适用于WPT系统,实测与仿真一致,阻带衰减分别大于52 dB和20 dB。
摘要:
本文提出了一种基于矩形4匝互补螺旋谐振器(4 CSR)的非常紧凑且低插入损耗的超材料带通滤波器(MBPF),其中心频率为f0=730 MHz。所提出的MBPF由顶层作为串联电容的叉指电容组成,从而改善了700至760 MHz通带范围内的阻带性能,使其适用于无线功率传输(WPT)系统,通过抑制不需要的信号来确保系统性能。为了验证所提出技术的性能,在RO-4003基板上制造了MBPF,仿真结果与实测结果达到了良好的一致性。在0.8×fcl(下截止频率)和1.2×fcu(上截止频率)附近分别获得了大于52 dB和20 dB的阻带衰减。
英文摘要:
In this paper, a very compact and low insertion loss metamaterial band-pass filter (MBPF) at the center frequency of f0=730 MHz is proposed, based on the rectangular-shape 4 turn complementary spiral resonators (4 CSR). The proposed MBPF consists of an interdigital capacitor as a series capacitance in the top layer, leading to improve the stopband performance in the pass band range of 700 to 760 MHz, which makes it suitable for wireless power transfer (WPT) systems by rejecting unwanted signals. In order to validate the performance of the proposed technique, the MBPF is fabricated on the RO-4003 substrate and great agreement is achieved between simulated and measured results. The stop band attenuations of greater than 52 dB and 20 dB are obtained around the 0.8xfcl (lower cutoff frequency) and 1.2xfcu (upper cutoff frequency), respectively.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。