arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2408.10287physics.opticscs.AIeess.IV
收藏

使用Transformer模型识别硅光子光栅的光束轮廓

Recognizing Beam Profiles from Silicon Photonics Gratings using Transformer Model

Nanyang Technological University(南洋理工大学);Institute of Microelectronics, Agency for Science, Technology and Research (A*STAR)(新加坡科技研究局微电子研究所);Samsung Electronics(三星电子)

Yu Dian Lim, Hong Yu Li, Simon Chun Kiat Goh, Xiangyu Wang, Peng Zhao, Chuan Seng Tan

AI总结:

针对硅光子光栅光束轮廓高度难以确定的问题,该研究开发了transformer模型,利用输入补丁和输入序列两种技术进行训练,实验对比了两者在识别准确率及稳定性上的表现,为光束自动聚焦等应用提供了基础。

摘要:

在过去十年中,离子阱量子计算领域在开发用于光学寻址囚禁离子量子比特的集成硅光子学(SiPh)光栅方面开展了大量工作。然而,在观察红外(IR)相机拍摄的光束轮廓时,通常很难确定光束轮廓所在的对应高度。在这项工作中,我们开发了transformer模型来识别来自SiPh光栅的光束轮廓的对应高度类别。该模型使用两种技术进行训练:(1)输入补丁,以及(2)输入序列。对于使用输入补丁训练的模型,模型的识别准确率达到0.938。同时,使用输入序列训练的模型显示出0.895的较低准确率。然而,当重复模型训练150个周期时,使用输入补丁训练的模型显示出0.445至0.959之间不一致的准确率范围,而使用输入序列训练的模型则表现出0.789至0.936之间更高的准确率值。所获得的结果可以扩展到各种应用中,包括光束的自动聚焦和z轴平台的自动调整,以获取所需的光束轮廓。

英文摘要:

Over the past decade, there has been extensive work in developing integrated silicon photonics (SiPh) gratings for the optical addressing of trapped ion qubits in the ion trap quantum computing community. However, when viewing beam profiles from infrared (IR) cameras, it is often difficult to determine the corresponding heights where the beam profiles are located. In this work, we developed transformer models to recognize the corresponding height categories of beam profiles of light from SiPh gratings. The model is trained using two techniques: (1) input patches, and (2) input sequence. For model trained with input patches, the model achieved recognition accuracy of 0.938. Meanwhile, model trained with input sequence shows lower accuracy of 0.895. However, when repeating the model-training 150 cycles, model trained with input patches shows inconsistent accuracy ranges between 0.445 to 0.959, while model trained with input sequence exhibit higher accuracy values between 0.789 to 0.936. The obtained outcomes can be expanded to various applications, including auto-focusing of light beam and auto-adjustment of z-axis stage to acquire desired beam profiles.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑