表面如何影响滑移系族活性的计算研究
A computational study of how surfaces affect slip family activity
AI总结:
该研究通过HCP和BCC金属的晶体塑性模拟,探究表面对滑移系族活性的影响及运动学机制,发现近表面两个晶粒内活性与块体有偏差,规律与滑移系数量相关。
摘要:
塑性变形行为最便于通过表面表征来评估,但这类观测结果能否代表块体性能仍不确定。受不同深度下测得的滑移阻力存在不一致性的报道启发,我们研究了两个问题:(1)平均滑移系族活性是否受表面存在的影响;(2)可用滑移系族的运动学特性如何影响潜在的表面效应。我们以随机多晶六方密堆(HCP,每个滑移系族的滑移系数量混合不均)和体心立方(BCC,每个滑移系族的滑移系数量普遍较高)金属为研究对象,从其全场晶体塑性模拟中提取了滑移系族活性随距表面距离变化的规律。在特定条件下,在距表面约两个晶粒的范围内,观测到滑移活性与块体滑移活性存在偏差。对于最易开动(滑移阻力最小)的滑移系族,当滑移系数量降至约6个以下时,会出现活性随深度增加而降低的表面效应;对于较难开动的滑移系族,滑移活性始终随深度增加而升高。这些现象可通过深度方向上约束条件的变化,结合材料中滑移系族的运动学特性来解释。
英文摘要:
Plastic deformation behavior is most conveniently assessed by characterization on a surface, but whether such observations are representative of bulk properties is uncertain. Motivated by reported inconsistencies in slip resistance probed at different depths, we investigated (i) whether the average slip family activity is affected by the presence of a surface and (ii) how the kinematic nature of available slip families influences a potential surface effect. The slip family activity as a function of distance from the surface was extracted from full-field crystal plasticity simulations of random polycrystalline hexagonal close-packed (HCP) and body-centered cubic (BCC) metals as examples of mixed in contrast to universally-high numbers of slip systems per family. Under certain conditions, a deviation from bulk slip activity is observed up to about two grains from the surface. For the easiest (least slip-resistant) family, a surface effect of decreasing activity with depth emerges if the number of slip systems falls below about six. For harder families, slip activity always increases with depth. These phenomena are explained on the basis of varying constraints with depth in connection with the kinematic properties of slip families in the material.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。