理解PbSe的输运行为:实验与计算相结合的研究
Understanding the transport behaviour of PbSe: A combined experimental and computational study
AI总结:
本研究结合Abinit和BoltzTrap计算与实验测量,系统分析了PbSe在300-500 K的热电输运行为,揭示了其直接带隙特性及Pb 6p和Se 4p态的主导贡献,并验证了SOC对塞贝克系数预测的重要性。
摘要:
铅硫族化合物是具有窄带隙的有前途的热电(TE)材料。本工作研究了PbSe在300-500 K温度范围内的热电行为。使用Abinit和BoltzTrap代码研究了样品的输运性质。实验观察到的塞贝克系数S在300和500 K时的值分别约为198和266 μV K⁻¹。从300到460 K(460到500 K)S的增加速率约为0.4(0.09)。温度依赖的电导率(σ)呈增加趋势,在300和500 K时的值分别约为0.35 × 10³和0.58 × 10³ Ω⁻¹ m⁻¹。此外,在300(500)K时热导率(κ)的值为0.74(1.07)W m⁻¹ K⁻¹。κ值在460 K之前呈增加趋势,然后开始下降。色散图表明PbSe是一种直接带隙半导体,考虑自旋轨道耦合(SOC)时带隙值为0.16 eV,不考虑SOC时为0.27 eV。分波态密度(PDOS)图显示Pb 6p和Se 4p态对输运性质有主要贡献。实验观察和计算得到的S值在SOC情况下吻合良好。计算得到的σ和电子热导率(κₑ)与实验数据吻合良好。在500 K时观察到最大功率因子(PF)值约为4.3 × 10⁻⁵ W/mK²。本工作通过实验测量与DFT方法的新颖而富有洞察力的结合,有助于理解PbSe的热电行为。
英文摘要:
Lead chalcogenides are the promising thermoelectric (TE) materials having narrow band gap. The present work investigates the TE behaviour of PbSe in the temperature range 300-500 K. The transport properties of the sample have been studied using the Abinit and BoltzTrap code. The experimentally observed value of \textit{S} at 300 and 500 K is found to be $\sim$ 198 and 266 $μ$V K$^{-1}$, respectively. The rate of increase in \emph{S} from 300 to 460 (460 to 500) K is found to be $\sim$ 0.4 (0.09). The temperature dependent electrical conductivity \textit{($σ$)} shows the increasing trend, with values of $\sim $ 0.35 $\times $ 10$^{3}$ and $\sim$ 0.58 $\times$ 10$^{3}$ $Ω$$^{-1}$ m$^{-1}$ at 300 and 500 K, respectively. Further, the value of thermal conductivity \textit{($κ$)} at 300 (500) K is found to be 0.74 (1.07) W m$^{-1}$ K$^{-1}$. The value of \textit{$κ$} is found to be increasing upto 460 K and then starts decreasing. The dispersion plot indicates that PbSe is a direct band gap semiconductor with band gap value of 0.16 (0.27) eV considering spin-orbit coupling (without SOC). The partial density of states (PDOS) plot shows that Pb 6p and Se 4p states have a major contribution in the transport properties. The observed and calculated values of \textit{S} gives a good match for SOC case. The calculated \textit{$σ$} and electronic part of thermal conductivity (\textit{$κ{_e}$}) gives good match with the experimental data. The maximum power factor (PF) value of $\sim$ 4.3 $\times$ 10$^{-5}$ W/mK$^{2}$ is observed at 500 K. This work helps in understanding the TE behaviour of PbSe through a novel and insightful alliance of experimental measurements and DFT approach.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。