arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2408.01574cond-mat.mtrl-sci
收藏

在 MOCVD 系统中使用叔丁基氯对 β-Ga2O3 进行原位刻蚀

In situ etching of \b{eta}-Ga2O3 using tert-butyl chloride in an MOCVD system

Cameron A. Gorsak, Henry J. Bowman, Katie R. Gann, Joshua T. Buontempo, Kathleen T. Smith, Pushpanshu Tripathi, Jacob Steele, Debdeep Jena, Darrell G. Schlom, H… 展开作者

Cameron A. Gorsak, Henry J. Bowman, Katie R. Gann, Joshua T. Buontempo, Kathleen T. Smith, Pushpanshu Tripathi, Jacob Steele, Debdeep Jena, Darrell G. Schlom, Huili Grace Xing, Michael O. Thompson, Hari P. Nair

AI总结:

该研究在 MOCVD 系统中利用 TBCl 热解产生的 HCl 对不同取向 β-Ga2O3 薄膜进行原位刻蚀,揭示了温度区制、活化能及各向异性机制,并获得光滑表面。

摘要:

在本研究中,我们研究了在金属有机化学气相沉积(MOCVD)系统中使用叔丁基氯(TBCl)对 β-Ga2O3 进行原位刻蚀。我们报告了在很宽的衬底温度、TBCl 摩尔流量和反应室压力范围内,成功刻蚀了异质外延(-201)取向和同质外延(010)取向的 β-Ga2O3 薄膜。我们确定可能的刻蚀剂是 TBCl 在衬底上方的流体动力学边界层中热解形成的 HCl(g)。刻蚀速率的温度依赖性揭示了两个不同的区域,其特征在于明显不同的表观活化能。提取的表观活化能表明,在低于约 800 °C 的温度下,刻蚀速率可能受到刻蚀产物解吸的限制。观察到异质外延(-201)和同质外延(010)β-Ga2O3 的相对刻蚀速率按表面能之比成比例变化,表明这是一种各向异性刻蚀。对于(010)同质外延薄膜,通过调节刻蚀参数获得了相对光滑的刻蚀后表面形貌。

英文摘要:

In this study, we investigate in situ etching of \b{eta}-Ga2O3 in a metal-organic chemical vapor deposition (MOCVD) system using tert-Butyl chloride (TBCl). We report the successful etching of both heteroepitaxial (-201)-oriented and homoepitaxial (010)-oriented \b{eta}-Ga2O3 films over a wide range of substrate temperature, TBCl molar flows, and reactor pressures. We identify that the likely etchant is HCl (g) formed by the pyrolysis of TBCl in the hydrodynamic boundary layer above the substrate. The temperature dependence of the etch rate reveals two distinct regimes characterized by markedly different apparent activation energies. The extracted apparent activation energies suggest that at temperatures below ~800 °C the etch rate is likely limited by desorption of etch products. The relative etch rates of heteroepitaxial (-201) and homoepitaxial (010) \b{eta}-Ga2O3 were observed to scale by the ratio of the surface energies indicating an anisotropic etch. For (010) homoepitaxial films, relatively smooth post-etch surface morphology was achieved by tuning the etching parameters.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑