高超声速流动中附面层附着线的数值模拟,第一部分:粗糙度引起的亚临界转捩
Numerical simulations of attachment-line boundary layer in hypersonic flow, Part I: roughness-induced subcritical transitions
AI总结:
该研究通过高保真数值模拟,揭示了高超声速钝头后掠体前缘附着线边界层中粗糙度引起的亚临界转捩机制,发现低粗糙元需额外扰动而高粗糙元可独立触发转捩,并识别出条纹的二次不稳定性为最终转捩的直接原因。
摘要:
附面层附着线在高超声速流动中至关重要,因为它对传热和气动性能有显著影响。本研究进行了高保真数值模拟,以分析高超声速条件下钝头后掠体前缘附着线边界层中亚临界粗糙度引起的层流-湍流转捩。该模拟通过成功再现真实构型中表面粗糙元引起的完整前缘污染过程,代表了重大进展,从而提供了以前无法获得的见解。研究了两个不同高度的粗糙元。对于较低高度的粗糙元,需要额外的非定常扰动来触发尾流中的转捩,这表明粗糙元周围的流场充当上游扰动的放大器。相反,较高的粗糙元可以独立地诱导转捩。在粗糙元后方检测到低频绝对不稳定性,导致条纹的形成。这些条纹的二次不稳定性被确定为最终转捩的直接原因。
英文摘要:
The attachment-line boundary layer is critical in hypersonic flows because of its significant impact on heat transfer and aerodynamic performance. In this study, high-fidelity numerical simulations are conducted to analyze the subcritical roughness-induced laminar-turbulent transition at the leading-edge attachment-line boundary layer of a blunt swept body under hypersonic conditions. This simulation represents a significant advancement by successfully reproducing the complete leading-edge contamination process induced by surface roughness elements in a realistic configuration, thereby providing previously unattainable insights. Two roughness elements of different heights are examined. For the lower-height roughness element, additional unsteady perturbations are required to trigger a transition in the wake, suggesting that the flow field around the roughness element acts as a disturbance amplifier for upstream perturbations. Conversely, a higher roughness element can independently induce the transition. A low-frequency absolute instability is detected behind the roughness, leading to the formation of streaks. The secondary instabilities of these streaks are identified as the direct cause of the final transition.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。