锂离子电池组Z型气流冷却系统的优化研究
Optimization study of a Z-type airflow cooling system of a lithium-ion battery pack
AI总结:
本文通过优化进口风速、渐缩歧管和次级出口数量,改善了Z型锂离子电池组风冷系统的热性能与气流均匀性,显著降低了最高温度和最大温差。
摘要:
本研究旨在优化一种配备强制风冷系统(FACS)的Z型流道锂离子电池组的结构设计,该系统被称为BTMS(电池热管理系统)。主要目标是在确保电池模块内气流分布均匀的同时,最小化Tmax(最高温度)和δTmax(最大温差)。本研究深入考察了进口空气速度、渐缩进口歧管以及次级出口数量等关键因素,以评估它们对电池模块内热性能和气流均匀性的影响。将进口空气速度从3 m/s提高到4.5 m/s可显著改善BTMS的热冷却性能,与原始3 m/s速度相比,Tmax降低了4.57 °C(10.05%),δTmax降低了0.29 °C(9.79%)。此外,研究评估了渐缩进口歧管作为关键因素的重要性,揭示了其对冷却性能和电池单元3-9温度降低的显著影响。它还有助于实现更均匀的气流分布,将通道9与通道1之间的速度差从3.32 m/s降低到2.50 m/s。加入7个次级出口显著提高了BTMS的散热能力,与0个次级出口的配置相比,Tmax降低了0.894 °C(2.18%),δTmax降低了2.23 °C(72.84%)。通过优化这些参数,目标是增强BTMS的能力,提高锂离子电池组的性能和可靠性。
英文摘要:
The present study aims to optimize the structural design of a Z-type flow lithium-ion battery pack with a forced air-cooling system (FACS) known as BTMS (Battery Thermal Management System). The main goal is to minimize Tmax (maximum temperature) and δTmax (maximum temperature difference) while ensuring an even airflow distribution within the battery module. The present study thoroughly investigates critical factors such as the inlet air velocity, tapered inlet manifold, and the number of secondary outlets to evaluate their impact on thermal performance and airflow uniformity within the battery module. Increasing the inlet air velocity from 3 to 4.5 m/s significantly improves the thermal cooling performance of the BTMS, resulting in a decrease of 4.57 °C (10.05%) in Tmax and 0.29 °C (9.79%) in δTmax compared to the original 3 m/s velocity. Further, the study assesses the significance of a tapered inlet manifold as a critical factor, revealing its substantial impact on cooling performance and temperature reductions in battery cells 3-9. It also facilitates a more uniform airflow distribution, decreasing the velocity difference between channel 9 and channel 1 from 3.32 m/s to 2.50 m/s. Incorporating 7 secondary outlets significantly improves the heat dissipation ability of the BTMS, resulting in a decrease of 0.894 °C (2.18%) in Tmax and 2.23 °C (72.84%) in δTmax compared to the configuration with 0 secondary outlets. By optimizing these parameters, the aim is to enhance BTMS's capabilities, improving LIB packs' performance and reliability.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。