Evaluating and improving the predictive accuracy of mixing enthalpies and volumes in disordered alloys from universal pre-trained machine learning potentials
Luis Casillas-Trujillo, Abhijith S. Parackal, Rickard Armiento, Björn Alling
The advent of machine learning in materials science opens the way for exciting and ambitious simulations of large systems and long time scales with the accuracy of ab-initio calculations. Recently, several pre-trained universal machine learned interatomic potentials (UPMLIPs) have been published, i.e., potentials distributed with a single set of weights trained to target systems across a very wide range of chemistries and atomic arrangements. These potentials raise the hope of reducing the computational cost and methodological complexity of performing simulations compared to models that require for-purpose training. However, the application of these models needs critical evaluation to assess their usability across material types and properties. In this work, we investigate the application of the following UPMLIPs: MACE, CHGNET, and M3GNET to the context of alloy theory. We calculate the mixing enthalpies and volumes of 21 binary alloy systems and compare the results with DFT calculations to assess the performance of these potentials over different properties and types of materials. We find that small relative energies necessary to correctly predict mixing energies are generally not reproduced by these methods with sufficient accuracy to describe correct mixing behaviors. However, the performance can be significantly improved by supplementing the training data with relevant training data. The potentials can also be used to partially accelerate these calculations by replacing the ab-initio structural relaxation step.
Tunable Band Gaps of In$_x$Ga$_{1-x}$N Alloys: From Bulk to Two-Dimensional Limit
采用第一性原理计算结合半经验范德华色散修正,我们研究了屈曲和平面少层In $_x$ Ga $_{1-x}$ N合金的结构参数、混合谱和带隙.我们预测,独立屈曲相的稳定性不如平面屈曲相。然而,氢钝化,在$_x$ Ga $_{1-x}$ N合金的屈曲变得更有利。它们的带隙可以从6 eV到1 eV进行调节,保留了直接带隙和良好定义的布洛赫特性,使它们成为未来发光应用的有希望的候选材料。与它们的本体对应物不同,由于减少了几何约束,在这些二维系统中可以抑制相分离。相反,无序的平面薄膜经历严重的晶格畸变,几乎失去了布洛赫字符的价带,而有序的平面的保持布洛赫字符,但具有最高的混合色散。
An augmented space approach to the study of phonons in disordered alloys : comparison between the itinerant coherent-potential approximation and the augmented space recursion
基于第一性原理的密度泛函线性响应理论(即所谓的密度泛函微扰理论\cite{dfpt})分别与最近发展的两种形式相结合,系统地研究了无序二元合金的晶格动力学。这两种形式是增广空间递归(ASR)和巡回相干势近似(ICPA)。这两种不同的理论(DFPT-ASR和DFPT-ICPA)系统地提供了对早期基于单站点的理论(如CPA等)的改进的层次结构。并且包括无序配置中的非局部相关性。形式主义明确考虑到波动的质量,力常数和散射长度。DFPT与这些公式的结合有助于理解合金中力常数的实际相互作用。我们通过应用于fcc Fe $_{50}$ Pd $_{50}$合金来说明该方法。
Information Entropy Based Crystal Structure Prediction of Chemically Disordered Alloys via Graph Convolutional Neural Networks
Indian Institute of Engineering Science and Technology, Shibpur(印度工程科学与技术学院,希布尔);Indian Institute of Technology (BHU), Varanasi(印度理工学院(贝拿勒斯印度教大学),瓦拉纳西)
First-principles study of disordered half-Heusler alloys \textit{X}Fe$_{0.5}$Ni$_{0.5}$Sn (\textit{X} = Nb, Ta) as thermoelectric prospects
半Heusler合金的高晶格热导率一直是热电应用的主要瓶颈。无序的半赫斯勒合金可能是解决这一困境的一个合理选择。在本文中,利用第一性原理模拟,我们已经证明了低晶格热导率在两个这样的阶段,NbFe $_{0.5}$ Ni $_{0.5}$ Sn和TaFe $_{0.5}$ Ni $_{0.5}$ Sn相比,众所周知的半赫斯勒合金TiCoSb。我们跟踪低热导率的短声子寿命,起源于声学和低位光学声子之间的相互作用。我们建议纳米结构作为进一步降低晶格热导率的有效途径。我们进一步预测这些合金可以在400-600~K的温度范围内和载流子浓度小于10 $^{21}$载流子cm $^{-3}$的情况下得到最佳的应用。与TiCoSb相比,我们发现NbFe $_{0.5}$ Ni $_{0.5}$ Sn和TaFe $_{0.5}$ Ni $_{0.5}$ Sn的$ZT$中$\sim$分别增强35%和17%。我们对这些发现持乐观态度,并相信这些材料将吸引实验研究。
Electronic structure and magnetism in disordered bcc Fe alloys
本文采用增强空间递归方法结合紧束缚线性松饼锡轨道(TB-LMTO)方法研究了bcc结构Co $_{x}$ Fe $_{1-x}$,Cr $_{x}$ Fe $_{1-x}$和Mn $_{x}$ Fe $_{1-x}$的电子结构和磁性.本文系统地研究了磁矩和居里温度等磁性,并从电荷转移、交换分裂和杂化等效应出发,对3-{ \it d}过渡金属系列的磁矩和居里温度的变化规律进行了讨论。
Modeling magnetic evolution and exchange hardening in disordered magnets: The example of Mn$_{1-x}$Fe$_x$Ru$_2$Sn Heusler alloys
我们演示了如何交换硬化可以出现在化学无序的固溶体从第一性原理统计力学的方法。一个通用的混合基化学和磁性集团展开已被开发,并应用到Mn $_{1-x}$ Fe $_x$ Ru $_2$ Sn Heusler合金系统;单相固溶体之间的反铁磁性\ch{MnRu2Sn}和铁磁性\ch{FeRu2Sn}与无序的Mn/Fe亚晶格,表现出意想不到的交换硬化。蒙特卡罗模拟适用于集群膨胀能够再现实验测得的磁转变温度和体磁化作为组合物的函数。一个网站周围的磁排序被证明是依赖于不仅散装组合物,但也对该网站的身份和该网站周围的本地组合物。模拟预测,本地反铁磁有序内形成一个散装铁磁区域在中间组成,驱动交换硬化。此外,反铁磁区域在比铁磁区域更低的温度下无序,为实验观察到的交换硬化随温度升高而降低提供了原子论解释。这些影响发生在太小的长度尺度上,无法用以前使用的表征技术来解决。
Upward band gap bowing and negative mixing enthalpy in multi-component cubic halide perovskite alloys
Renewable and Sustainable Energy Institute, University of Colorado(科罗拉多大学可再生能源与可持续能源研究所);Department of Materials Engineering, São Carlos School of Engineering, University of São Paulo(圣保罗大学圣卡洛斯工程学院材料工程系)
Magnetic Compton profiles of disordered Fe$_{0.5}$Ni$_{0.5}$ and ordered FeNi alloys
本文研究了无序Fe $_{0.5}$ Ni $_{0.5}$和有序FeNi合金的磁康普顿轮廓(MCP),讨论了结构无序和电子关联之间的相互作用。相干势近似被用来模拟置换无序内的单网站近似,而本地电子关联捕获的动态平均场论。与实验数据的比较揭示了局域自旋密度近似在低动量区的局限性,我们表明,包括本地,但动态关联的实验光谱是很好的描述。我们进一步表明,使用本地自旋密度近似之间没有显着的差异被视为MCP光谱的无序Fe $_{0.5}$ Ni $_{0.5}$和一个假设的,有序的FeNi合金与一个简单的立方晶胞。只有通过包括电子相关,光谱显着分离,从第二布里渊区边界下降到零动量。有序和无序合金的MCP光谱之间的差异进行了讨论,也在原子类型的分解。最后,根据计算结果预测了有序FeNi合金沿[111]方向的MCP轮廓形状。
Exploring In$_2$(Se$_{1-x}$Te$_x$)$_3$ alloys as photovoltaic materials
In $_2$ Se $_3$在三维(3D)六方晶体结构中具有空间群$P6_1$($γ$ -In $_2$ Se $_3$),具有$\sim$ 1.8 eV的直接带隙和高吸收系数,使其成为用于光电子学的有前景的半导体材料。碲化允许调整带隙,增加器件设计的灵活性并扩展应用范围。在这里,我们报告的$γ$ -在$_2$硒$_3$薄膜的生长和表征,以及混合密度泛函理论计算的结果,以评估$γ$ -在$_2$硒$_3$和$γ$ -在$_2$(硒$_{1-x}$碲$_x$)$_3$合金的电子和光学性质。计算的$γ$ -In $_2$ Se $_3$的带隙为1.84 eV,与吸收光谱数据吻合良好,并且发现吸收系数与直接带隙常规III-V族和II-VI族半导体的吸收系数一样高。以$γ$ -In $_2$(Se $_{1-x}$ Te $_x$)$_3$合金的形式引入Te是将带隙从1.84 eV调谐到1.23 eV的有效方式,从而覆盖太阳能电池的最佳带隙范围。我们还讨论了带隙弯曲和混合弯曲,旨在将$γ$ -In $_2$ Se $_3$和$γ$ -In $_2$(Se $_{1-x}$ Te $_x$)$_3$合金添加到太阳能电池和其他光电器件的可用材料工具箱中。
Room temperature intrinsic anomalous Hall effect in disordered half-metallic ferromagnetic quaternary Heusler alloy CoRuFeSi
National Institute of Technology Andhra Pradesh(安得拉邦国立技术学院);Indian Institute of Technology Hyderabad(海德拉巴印度理工学院);Institute of Low Temperature and Structure Research, Polish Academy of Sciences(波兰科学院低温结构研究所);Indian Institute of Technology Kanpur(坎普尔印度理工学院);UGC-DAE Consortium for Scientific Research, Kolkata Centre(UGC-DAE科学研究中心加尔各答中心)
Machine learning to explore high-entropy alloys with desired enthalpy for room-temperature hydrogen storage: Prediction of density functional theory and experimental data
Machine learning via artificial neural networks coupled with density functional theory and experiments for thermodynamic optimization of high-entropy alloys for hydrogen storage at room temperature
WPI, International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University(九州大学);Department of Automotive Science, Graduate School of Integrated Frontier Sciences, Kyushu University(九州大学);Institute for Materials Science, University of Stuttgart(斯图加特大学)