arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2406.17487physics.med-ph
收藏

全尺度拓扑优化设计的解剖与力学适配患者特异性脊柱融合笼

Anatomically and mechanically conforming patient-specific spinal fusion cages designed by full-scale topology optimization

Thijs Smit, Niels Aage, Daniel Haschtmann, Stephen J. Ferguson, Benedikt Helgason

AI总结:

本研究提出全尺度拓扑优化设计脊柱融合笼,考虑相邻骨结构响应并施加主应变约束,所得解剖与力学适配笼显著降低下沉风险,并经增材制造与机械测试验证。

摘要:

器械腰椎融合术后笼下沉仍是治疗失败的重要原因,特别是对于后路或经椎间孔腰椎椎间融合术。计算技术和增材制造的最新进展,使得开发患者特异性植入物以及针对特定功能目标进行植入物优化成为可能。本研究旨在引入一种新颖的全尺度拓扑优化公式,该公式在优化过程中考虑了相邻骨结构的结构响应。该公式包含最大和最小主应变约束,以降低相邻椎体中的应变集中。这种优化方法产生了解剖与力学适配的脊柱融合笼。在两个代表性患者中,使用商业有限元求解器对现成、解剖适配和优化后的笼进行了下沉风险评估。我们证明,与具有相同覆盖面的现成植入物相比,解剖与力学适配的笼在骨质量正常的患者中将下沉风险降低了91%,在骨量减少的患者中降低了54%。优化后的笼原型通过增材制造并进行了机械测试,以评估设计的可制造性和完整性,并验证有限元模型。

英文摘要:

Cage subsidence after instrumented lumbar spinal fusion surgery remains a significant cause of treatment failure, specifically for posterior or transforaminal lumbar interbody fusion. Recent advancements in computational techniques and additive manufacturing, have enabled the development of patient-specific implants and implant optimization to specific functional targets. This study aimed to introduce a novel full-scale topology optimization formulation that takes the structural response of the adjacent bone structures into account in the optimization process. The formulation includes maximum and minimum principal strain constraints that lower strain concentrations in the adjacent vertebrae. This optimization approach resulted in anatomically and mechanically conforming spinal fusion cages. Subsidence risk was quantified in a commercial finite element solver for off-the-shelf, anatomically conforming and the optimized cages, in two representative patients. We demonstrated that the anatomically and mechanically conforming cages reduced subsidence risk by 91% compared to an off-the-shelf implant with the same footprint for a patient with normal bone quality and 54% for a patient with osteopenia. Prototypes of the optimized cage were additively manufactured and mechanically tested to evaluate the manufacturability and integrity of the design and to validate the finite element model.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑