拉拔圆柱体过程中热与流体传输的耦合
Coupled heat and fluid transport in pulled extrusion of cylinders
AI总结:
研究了在拉拔过程中热与流体传输的耦合问题,提出了一种新的有限差分数值方法以解决扩展流中的热传导问题,发现热传导显著影响内部孔洞的尺寸。
摘要:
在光纤制造中,玻璃的粘度随温度剧烈变化,因此热传递在纤维几何变形中起重要作用。对于准稳态拉拔,通过测量拉力,可调整热量以控制张力,无需温度建模。然而,当拉力未测量时,需要耦合热和流体流动模型来确定所需输入。在快速拉拔预形体为纤维的过程中,热对流主导热传导,因此热传导可被忽略。相反,在缓慢挤出预形体的过程中,热传导很重要。这意味着解决耦合流体和温度建模对于预测预形体几何形状至关重要。本文推导了这种模型,该模型包含扩展流中热传导的建模。粘度随温度的剧烈变化使得通过标准数值技术解决此问题极具挑战性,因此我们开发了一种新的有限差分数值求解方法,证明其高度稳健。我们使用该方法表明,热传导显著影响设备出口处内部孔洞的尺寸。
英文摘要:
In the fabrication of optical fibres, the viscosity of the glass varies dramatically with temperature so that heat transfer plays an important role in the deformation of the fibre geometry. Surprisingly, for quasi-steady drawing, with measurement of pulling tension, the applied heat can be adjusted to control the tension and temperature modelling is not needed. However, when pulling tension is not measured, a coupled heat and fluid flow model is needed to determine the inputs required for a desired output. In the fast process of drawing a preform to a fibre, heat advection dominates conduction so that heat conduction may be neglected. By contrast, in the slow process of extruding a preform, heat conduction is important. This means that solving the coupled flow and temperature modelling is essential for prediction of preform geometry. In this paper we derive such a model that incorporates heat conduction for the extensional flow of fibres. The dramatic variations in viscosity with temperature means that this problem is extremely challenging to solve via standard numerical techniques and we therefore develop a novel finite-difference numerical solution method that proves to be highly robust. We use this method to show that conduction significantly affects the size of internal holes at the exit of the device.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。