关于立体光刻3D打印制造的组件在高真空系统中的应用
On the application of components manufactured with stereolithographic 3D printing in high vacuum systems
AI总结:
本研究探索Formlabs Clear Resin立体光刻3D打印组件在高真空系统的兼容性,发现主要污染物为水,可通过简单处理控制,未烘烤系统达1.9e-8 mbar,并有望扩展至超高真空应用。
摘要:
我们探索了Formlabs 'Clear Resin'通过还原光聚合(VPP)在超高真空(UHV)环境下的兼容性。我们报告了一种使用VPP增材制造,特别是Formlabs广泛可用的立体光刻(SLA)打印及其'Clear Resin'材料,来快速且廉价地制造用于高真空(HV)环境中的原型组件的方法。我们展示了抽气曲线和残余气体分析,以证明新打印的SLA塑料的主要真空污染物是水,没有证据表明材料中有聚合物放气,因此可以通过不涉及表面密封的简单处理来控制真空性能。一个包含SLA打印组件且未烘烤的真空系统达到了1.9e-8 mbar的基础压力,同时保持了结构完整性和制造精度。HV测试腔中的放气速率和UHV腔中的初步结果表明,我们的方法可以扩展到实现超高真空兼容性。我们进一步报告了大气暴露对组件的影响,并提出了证据表明水的重新吸附/吸收仅发生在表面,通过显示材料的整体质量变化在研究的时标(<2周)内是不可逆的。
英文摘要:
We explore the ultrahigh-vacuum (UHV) compatibility of Formlabs `Clear Resin' via vat photopolymerization (VPP). We report on a method for using VPP additive manufacturing, specifically Formlabs' widely available stereolithographic (SLA) printing using their `Clear Resin' material, to rapidly and cheaply prototype components for use in high-vacuum (HV) environments. We present pump down curves and residual gas analysis to demonstrate the primary vacuum contaminant from freshly printed SLA plastics is water with no evidence of polymers outgassing from the material and thus the vacuum performance can be controlled with simple treatments which do not involve surface sealing. An unbaked vacuum system containing SLA printed components achieved 1.9e-8 mbar base pressure whilst retaining structural integrity and manufacturing accuracy. Outgassing rates in the HV test chamber and preliminary results in a UHV chamber indicate that our method can be extended to achieve ultrahigh-vacuum compatibility. We further report on the effect of atmospheric exposure to components and present evidence to suggest that water re-ad/absorption occurs exclusively on the surface, by showing that the bulk mass changes of the material is irreversible on the timescale investigated (< 2 weeks).
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。