arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2404.07508eess.SYcs.SY
收藏

一种先进的基于物理的1D质子交换膜氢燃料电池模型,具有增强的过电势预测

An advanced 1D physics-based model for PEM hydrogen fuel cells with enhanced overvoltage prediction

Université de Franche-Comté, UTBM(弗朗什-孔泰大学,贝尔福管理学院);Aix Marseille Univ(艾克斯-马赛大学);Institut Universitaire de France(法国高等研究院)

Raphaël Gass, Zhongliang Li, Rachid Outbib, Samir Jemei, Daniel Hissel

AI总结:

本文提出了一种基于物理的1D燃料电池模型,引入极限液体水饱和度系数以提升过电势预测精度,并通过实验验证模型的静态行为。

摘要:

本文开发了一种一维、动态、两相、等温的质子交换膜燃料电池系统模型,采用有限差分法进行求解。该模型在简化参数模型的简洁性和计算流体动力学模型的详细准确性之间取得了平衡,能够以较低的计算需求提供精确的内部状态描述。模型的静态行为通过极化曲线实验进行了验证。此外,引入了一个新的物理参数,极限液体水饱和度系数(s_lim),用于过电势计算,取代了传统的极限电流密度系数(i_lim)。这个新参数将高电流密度下的电压降与催化剂层中的液体水含量以及燃料电池的操作条件联系起来。此外,观察到s_lim至少受到操作者施加的气体压力的影响。这种新建立的联系对于优化控制并提高燃料电池性能具有前景。

英文摘要:

A one-dimensional, dynamic, two-phase, isothermal model of proton exchange membrane fuel cell systems using a finite-difference approach has been developed. This model balances the simplicity of lumped-parameter models with the detailed accuracy of computational fluid dynamics models, offering precise internal state descriptions with low computational demand. The model's static behavior is validated experimentally using polarization curves. In addition, a novel physical parameter, the limit liquid water saturation coefficient ($s_{\rm lim}$), is introduced in the overvoltage calculation, replacing the traditional limit current density coefficient ($i_{\rm lim}$). This new parameter links the voltage drop at high current densities to the amount of liquid water present in the catalyst layers and the operating conditions of the fuel cell. Additionally, it has been observed that $s_{\rm lim}$ is influenced at least by the gas pressure applied by the operator. This newly established link is promising for optimizing the control and thereby improving the performance of fuel cells.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑