硬碳电极中羧甲基纤维素粘结剂的力学效应
Mechanical effects of carboxymethylcellulose binder in hard carbon electrodes
AI总结:
本研究通过压痕测试和计算模型,发现硬碳电极中羧甲基纤维素粘结剂含量增加可提升弹性模量和容量保持率,建议根据循环寿命和柔韧性需求选择粘结剂含量。
摘要:
钠离子电池电极在生产和使用过程中会承受机械应力,这可能损坏这些脆弱的涂层,导致性能低下和早期失效。粘结剂材料为电极复合材料提供弹性以抵抗断裂,但评估粘结剂的有效性因这些薄膜的基底依赖性而变得复杂,而传统电池测试则受到多种电化学变量的困扰。本工作介绍了一种实用的低成本压痕测试方法,用于测定含有标准羧甲基纤维素粘结剂的硬碳电极的弹性。使用所提出的方法,测得硬碳电极的相对弹性模量分别为0.079 GPa(1%粘结剂)、0.088 GPa(2%粘结剂)、0.105 GPa(3%粘结剂)和0.113 GPa(4%粘结剂),并通过薄膜挠度计算模型验证了这些结果,以预测应力下的机械变形。通过阻抗谱和钠半电池的恒电流循环,还展示了粘结剂对硬碳阳极电化学性能的影响,结果显示含4%粘结剂的阳极比含1%粘结剂的阳极容量保持率高出8-9%。这些发现表明,硬碳电极中粘结剂含量应根据电池制造过程中对循环寿命和薄膜柔韧性的要求来选择。
英文摘要:
Electrodes in sodium-ion batteries endure mechanical stress during production and application, which can damage these fragile coatings, causing performance inefficiencies and early failure. Binder material provides elasticity in electrode composites to resist fracture, but evaluating the effectiveness of binder is complicated by substrate dependency of these films, while conventional cell tests are beset by multiple electrochemical variables. This work introduces a practical low-cost indentation test to determine the elasticity of hard carbon electrodes containing standard carboxymethylcellulose binder. Using the proposed method, relative elastic moduli of hard carbon electrodes were found to be 0.079 GPa (1% binder), 0.088 GPa (2% binder), 0.105 GPa (3% binder) and 0.113 GPa (4% binder), which were validated using a computational model of film deflection to predict mechanical deformation under stress. Effects on the electrochemical performance of hard carbon anodes were also demonstrated with impedance spectroscopy and galvanostatic cycling of sodium half-cells, revealing 8-9% higher capacity retention of anodes with 4% binder compared with those containing 1% binder. These findings suggest binder content in hard carbon electrodes should be selected according to requirements for both cycle life and film flexibility during cell manufacturing.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。