arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2403.05309cs.RO
收藏

一种用于PCB元器件拆焊工艺的接触式机器人系统

An in-Contact Robotic System for the Process of Desoldering PCB Components

Institute of Systems and Robotics(系统与机器人研究所);University of Coimbra(科英布拉大学);CEMMPRE(CEMMPRE机构);ARISE(ARISE机构)

Silvia Santos, Lino Marques, Pedro Neto

AI总结:

针对电子废弃物回收中PCB元器件拆解人工效率低的问题,研究提出含受控接触阶段的机器人拆焊策略,搭配专用可控力工具,大尺寸元器件拆焊成功率约100%,推动拆焊流程自动化。

摘要:

电子废弃物(e-waste)的处理与回收是一项全球性挑战。元器件拆解是实现高效回收流程、避免采用破坏性方法的关键步骤。尽管由于元器件的多样性与复杂性,大部分拆解工作目前仍由人工完成,但业界对开发自动化方法以提升效率、降低人力成本的兴趣日益浓厚。本研究旨在实现印刷电路板(printed circuit boards,PCBs)元器件拆焊及提取流程的机器人化,目标是尽可能实现该流程的自动化。所提出的策略包含多个阶段,其中包括机器人工具与PCB元器件的受控接触。研究开发了一种专用工具,可对PCB元器件施加可控力,将其从电路板上移除。实验结果表明,采用该方法移除PCB元器件具备可行性,且成功率较高(对于尺寸较大的PCB元器件,成功率约为100%)。

英文摘要:

The disposal and recycling of electronic waste (e-waste) is a global challenge. The disassembly of components is a crucial step towards an efficient recycling process, avoiding the destructive methods. Although most disassembly work is still done manually due to the diversity and complexity of components, there is a growing interest in developing automated methods to improve efficiency and reduce labor costs. This study aims to robotize the desoldering process and extracting components from printed circuit boards (PCBs), with the goal of automating the process as much as possible. The proposed strategy consists of several phases, including the controlled contact of the robotic tool with the PCB components. A specific tool was developed to apply a controlled force against the PCB component, removing it from the board. The results demonstrate that it is feasible to remove the PCB components with a high success rate (approximately 100% for the bigger PCB components).

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑