arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2403.04876physics.flu-dyn
收藏

基于量子的樽海鞘群算法驱动的Savonius风力涡轮机-圆柱形导流板系统设计优化

Quantum-Based Salp Swarm Algorithm Driven Design Optimization of Savonius Wind Turbine-Cylindrical Deflector System

Paras Singh, Vishal Jaiswal, Subhrajit Roy, Aryan Tyagi, Gaurav Kumar, Raj Kumar Singh

AI总结:

本研究针对Savonius涡轮机返回叶片反向扭矩限制效率的问题,提出基于QSSO算法结合Kriging代理模型、URANS模拟的优化框架,优化涡轮机-圆柱形导流板系统设计,显著提升了功率系数。

摘要:

Savonius涡轮机是低速工况下小型风力涡轮机应用中的主流设备,但其返回叶片上存在反向扭矩,导致效率提升受限,这一问题阻碍了其高效运行。一种可行的解决方案是通过圆柱形导流板引导来流气流,从而抵消这种阻滞扭矩。然而,此类流动控制效果高度依赖圆柱形导流板的位置、尺寸以及其角速度。本研究提出了一种新型设计优化框架,专门用于提升涡轮机-导流板系统的性能。为保障计算效率,研究采用了代理模型,共评估了六种不同模型,其中Kriging(克里金)模型在拟合设计参数与目标函数之间的关系方面表现最优,因此被选用于后续分析。代理模型的训练数据以及系统周围的流场数据,均通过采用滑动网格技术的非定常雷诺平均纳维-斯托克斯(URANS)模拟获取。随后,研究采用自主编写的Quantum-based Salp Swarm Optimization(QSSO,基于量子的樽海鞘群优化)算法代码,求解得到固定式导流板-涡轮机系统对应峰值功率系数(Cp)的设计参数。此外,研究还将QSSO算法与其他九种对比算法进行了定量比较。结果显示,在叶尖速比(TSR)为0.9的条件下,优化后的固定式导流板-涡轮机系统的Cp较基准工况提升了26.94%。针对导流板旋转角速度($ω_d$)的影响开展的进一步研究揭示了更显著的性能提升:在TSR为0.9时,与无导流板配置相比,$ω_d$=3 rad/s时Cp提升40.98%,$ω_d$=40 rad/s时提升51.23%;与优化后的固定式导流板配置相比,$ω_d$=3 rad/s时Cp提升11.33%,$ω_d$=40 rad/s时提升19.42%。

英文摘要:

Savonius turbines, prominent in small-scale wind turbine applications operating under low-speed conditions, encounter limitations due to opposing torque on the returning blade, impeding high efficiency. A viable solution involves mitigating this retarding torque by directing incoming airflow through a cylindrical deflector. However, such flow control is highly contingent upon the location and size of the cylindrical deflector, and its angular velocity. This study introduces a novel design optimization framework tailored for enhancing the turbine-deflector system's performance. Leveraging surrogate models for computational efficiency, six different models were assessed, with Kriging selected for subsequent analysis based on its superior performance at approximating the relation between design parameters and objective function. The training data for the surrogate model and the flow field data around the system were obtained through Unsteady Reynolds-Averaged Navier Stokes (URANS) simulations using a sliding mesh technique. An in-house code for the Quantum-based Salp Swarm Optimization (QSSO) algorithm was then employed to obtain design parameters corresponding to the peak power coefficient (Cp) for the stationary deflector-turbine system. Additionally, the QSSO algorithm was quantitatively compared with nine other competing algorithms. The optimized stationary deflector-turbine system showed an improvement of 26.94% in Cp at Tip Speed Ratio (TSR) of 0.9 compared to the baseline case. Further investigation into the effect of deflector rotational velocity ($ω_d$) revealed significant improvements: 40.98% and 11.33% enhancement at $ω_d$ = 3 rad/s, and 51.23% and 19.42% at $ω_d$ = 40 rad/s, compared to configurations without a deflector and with the optimized stationary deflector, respectively at a TSR of 0.9.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑