arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2402.13837cs.RO
收藏

小型水下机器人及室内实验数据采集系统的设计

Design of a Miniature Underwater Vehicle and Data Collection System for Indoor Experimentation

Department of Mechanical Engineering and Engineering Science(机械工程与工程科学系);University of North Carolina at Charlotte(北卡罗来纳大学夏洛特分校)

Jacob Herbert, Artur Wolek

AI总结:

本文提出了一种小型水下机器人及数据采集系统的设计,通过3D打印和低成本电子元件实现,用于室内实验环境中的浮力控制与运动测试。

摘要:

本文描述了一种小型无人水下机器人(MiniUUV)及相关仪器的设计,用于室内实验。MiniUUV采用3D打印部件和低成本现成电子元件开发。该机器人使用螺旋桨差分推进驱动和带有注射器的蠕动泵进行浮力控制。构建了一个带有顶置摄像头系统的水槽,以允许在受控环境中方便地进行室内数据采集。进行了若干测试以展示MiniUUV和数据采集系统的能力,包括浮力泵操作测试和在水面上的直线、圆周和折线运动测试。在每次平面运动测试中,将AprilTag附加到MiniUUV上,并通过顶置摄像头系统获取视频记录,这些记录在离线处理中用于估计车辆位置、推力速度、横荡速度、偏航角和偏航率。

英文摘要:

This paper describes the design of a miniature uncrewed underwater vehicle (MiniUUV) and related instrumentation for indoor experimentation. The MiniUUV was developed using 3D printed components and low-cost, off-the-shelf electronics. The vehicle uses a propeller differential propulsion drive and a peristaltic pump with a syringe for buoyancy control. A water tank with an overhead camera system was constructed to allow for convenient indoor data collection in a controlled environment. Several tests were conducted to demonstrate the capabilities of the MiniUUV and data collection system, including buoyancy pump actuation tests and straight line, circular, and zig-zag motion tests on the surface. During each planar motion test an AprilTag was attached to the MiniUUV and an overhead camera system obtained video recordings that were processed offline to estimate vehicle position, surge velocity, sway velocity, yaw angle, and yaw rate.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑