We present a novel Front-Tracking method, the Edge-Based Interface Tracking (EBIT) method for multiphase flow simulations. In the EBIT method, the markers are located on the grid edges and the interface can be reconstructed without storing the connectivity of the markers. This feature makes the process of marker addition or removal easier than in the traditional Front-Tracking method. The EBIT method also allows almost automatic parallelization due to the lack of explicit connectivity.
In a previous journal article we have presented the kinematic part of the EBIT method, that includes the algorithms for piecewise linear reconstruction and advection of the interface. Here, we complete the presentation of the EBIT method and combine the kinematic algorithm with a Navier--Stokes solver. A circle fit is now implemented to improve the accuracy of mass conservation in the reconstruction phase. Furthermore, to identify the reference phase and to distinguish ambiguous topological configurations, we introduce a new feature: the Color Vertex. For the coupling with the Navier--Stokes equations, we first calculate volume fractions from the position of the markers and the Color Vertex, then viscosity and density fields from the computed volume fractions and finally surface tension stresses with the Height-Function method. In addition, an automatic topology change algorithm is implemented into the EBIT method, making it possible the simulation of more complex flows. The two-dimensional version of the EBIT method has been implemented in the free Basilisk platform, and validated with seven standard test cases: stagnation flow, translation with uniform velocity, single vortex, Zalesak's disk, capillary wave, Rayleigh-Taylor instability and rising bubble. The results are compared with those obtained with the Volume-of-Fluid (VOF) method already implemented in Basilisk.
A Three-dimensional Edge-Based Interface Tracking (EBIT) Method for Multiphase-flow Simulations
Sorbonne Université(索邦大学);CNRS, Institut Jean Le Rond d’Alembert UMR 7190(法国国家科学研究中心,让·勒朗·达朗贝尔研究所 UMR 7190);State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace, Xi’an Jiaotong University(西安交通大学航天学院,机械结构强度与振动国家重点实验室);Università di Bologna(博洛尼亚大学);Institut Universitaire de France(法兰西学术院)
A variational front-tracking method for multiphase flow with triple junctions
Fakultät für Mathematik, Universität Regensburg(雷根斯堡大学数学学院);Dipartimento di Mathematica, Università di Trento(特伦托大学数学系);School of Mathematical Sciences, University of Science and Technology of China(中国科学技术大学数学科学学院)
Synchrotron X-Ray Multi-Projection Imaging (XMPI) for High-Resolution 4D Characterization of Multiphase Flows
KTH Royal Institute of Technology(皇家理工学院);Lund University(隆德大学);Université Grenoble Alpes(格勒诺布尔阿尔卑斯大学);MAX IV Laboratory(MAX IV实验室);Ferrara University(费拉拉大学)
An efficient three-dimensional multiple-relaxation-time lattice Boltzmann model for multiphase flows
本文提出了一种适用于多相流模拟的具有多重弛豫时间碰撞算子的三维格子Boltzmann模型。这个模型是我们以前的二维模型(H。梁湾,澳-地C.施,Z. L. Guo和Z. H. Chai,Phys. Rev. E. 89,053320(2014))到三维,使用用于Chan-Hilliard方程(CHE)的D3 Q7(三维中的七个离散速度)晶格和用于纳维-斯托克斯方程(NSE)的D3 Q15晶格。由于采用了较小的网格速度数,在模拟真实三维流动时,计算效率得到了显著提高,同时通过chapman-Enskog过程,该模型能够正确地恢复到CHE和NSE。通过两个基准界面跟踪问题,将本文提出的MRT模型与单弛豫时间模型和三维LB模型进行了比较,数值结果表明,本文提出的MRT模型在界面捕捉的精度和稳定性方面都有了显著的提高.所开发的模型也能够处理具有非常低的粘度的多相流体,由于使用的MRT碰撞模型,这是通过模拟在不同的雷诺数的经典瑞利-泰勒不稳定性证明。在这项工作中考虑的最大雷诺数达到$4000$,这是大于那些几乎以前的模拟。研究发现,在高雷诺数下,不稳定性导致界面结构更加复杂。
Central Moment Lattice Boltzmann Method using a Pressure-based Formulation for Multiphase Flows at High Density Ratios and including Effects of Surface Tension and Marangoni Stresses
Implementation of integral surface tension formulations in a volume of fluid framework and their applications to Marangoni flows
University of Twente(特温特大学);Sorbonne Université, CNRS, Institut Jean Le Rond d’Alembert(索邦大学,法国国家科学研究中心,让·勒朗·达朗贝尔研究所);Canon Production Printing Netherlands B.V.(佳能生产打印荷兰有限公司);Max Planck Institute for Dynamics and Self-Organisation(马克斯·普朗克动力学与自组织研究所)