arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2402.13543cond-mat.mtrl-sciphysics.app-ph
收藏

含石墨烯的常温固化单组分碱激发材料用于热能储存的高温稳定性研究

High-temperature stability of ambient-cured one-part alkali-activated materials incorporating graphene for thermal energy storage

Nghia Tran, Tuan Nguyen, Jay Black, Tuan Ngo

AI总结:

本文研究了含石墨烯纳米片的常温固化单组分碱激发材料在200-800°C高温下的稳定性,发现其在400°C时强度可达约100 MPa,并揭示了GNPs的成核作用及元素比值与热稳定性的关联,证明该材料适用于400-600°C热能储存。

摘要:

本研究对含有石墨烯纳米片(GNPs)、粉煤灰、矿渣和硅灰的常温固化单组分碱激发材料(AAM)在经历200至800°C高温暴露后的性能进行了研究。通过目视观察、等温量热法、TGA、XRD、SEM-EDS和X射线CT对其抗压强度、热性能、微观结构和孔结构进行了表征。研究结果表明,所开发的AAM在常温条件下具有高强度特性(80 MPa),加热至400°C后可进一步提高至约100 MPa。GNPs为促进地质聚合和结晶提供了成核效应。从X射线CT观察到,大量严重裂纹从核心萌生并向表面扩展。通过SEM-EDS分析发现,高Na-Al和Na-Si比值或低Si-Al和Ca-Si比值与热稳定性高度相关。总体而言,研究结果表明,纳米工程AAM在400至600°C的热能储存(TES)应用中具有良好前景。

英文摘要:

In this research, the ambient cured one part alkali activated material (AAM) containing graphene nanoplatelets (GNPs), fly ash, slag and silica fume has been investigated after high temperature exposure to 200 to 800oC. Their compressive strength, thermal properties, microstructure, pore structure were characterised through visual observation, isothermal calorimetry, TGA, XRD, SEM-EDS and X-ray CT. The research findings indicated high strength characteristics of the developed AAM (80 MPa) at ambient condition, which could further reach to approx. 100 MPa after being heated up to 400oC. GNPs provided nucleation effects for promoting geopolymerisation and crystallisation. As observed from X-ray CT, a high extent of severe cracks initiated from the core and propagated towards the surface. From SEM-EDS analysis, high Na-Al and Na-Si ratios or low Si-Al and Ca-Si ratios highly correlated to thermal stability. Overall, the research outcomes implied the promising use of the nano-engineered AAMs for thermal energy storage (TES) at 400 to 600oC.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑