用于提升平面电磁执行器性能的设计参数优化
Optimisation of design parameters to improve performance of a planar electromagnetic actuator
AI总结:
针对平面电磁执行器电磁刚度小、驱动带宽受限的问题,推导电磁力与刚度的闭式表达式,优化线圈与磁组件设计参数,实验验证优化后性能提升显著且结果与解析值误差低于15%。
摘要:
基于直线电机原理的平面电磁执行器被广泛应用于微纳定位场景。这类执行器通常采用由共面电磁线圈驱动的平面磁平台。尽管这类执行器具备大行程和高定位分辨率的优势,但受限于电磁刚度相对较小,其驱动带宽存在瓶颈。本文报道了针对电磁线圈与磁组件的设计参数优化工作,旨在最大化电磁力与电磁刚度。首先,我们推导了电磁力与电磁刚度的解析闭式表达式,从而可通过执行器的设计参数对这些物理量进行表征。其次,基于推导得到的表达式,我们估算了可实现力与刚度最大化的设计参数最优值。值得注意的是,在最优设计参数下,将电磁线圈的节距缩小至原来的1/10后,单位体积的电磁力和刚度可分别提升2个和3个数量级。最后,我们研制了一款电磁执行器,并采用基于微机电系统(MEMS)的力传感器对其性能进行评估。通过将力传感器接入反馈回路运行,我们精确测量了执行器不同设计参数下产生的电磁力。所得实验结果与解析值高度吻合,误差低于15%。
英文摘要:
Planar electromagnetic actuators based on the principle of linear motors are widely employed for micro and nano positioning applications. These actuators usually employ a planar magnetic platform driven by a co-planar electromagnetic coil. While these actuators offer a large motion range and high positioning resolution, their actuation bandwidth is limited due to relatively small electromagnetic stiffness. We report optimization of the design parameters of the electromagnetic coil and the magnetic assembly to maximize the electromagnetic force and stiffness. Firstly, we derive closed-form expressions for the electromagnetic forces and stiffness, which enable us to express these quantities in terms of the design parameters of the actuator. Secondly, based on these derived expressions, we estimate the optimum values of the design parameters to maximize force and stiffness. Notably, for the optimum design parameters, the force and stiffness per unit volume can be increased by two and three orders of magnitude, respectively by reducing the pitch of the electromagnetic coil by a factor of 10. Lastly, we develop an electromagnetic actuator and evaluate its performance using a Microelectromechanical system (MEMS) based force sensor. By operating the force sensor in a feedback loop, we precisely measure the generated electromagnetic forces for different design parameters of the actuator. The experimental results obtained align closely with the analytical values, with an error of less than 15%.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。