使用焦耳级短脉冲激光辐照实现细丝的柱面压缩
Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser
AI总结:
本研究提出利用单束焦耳级短脉冲激光辐照细丝产生柱面冲击波,实现材料的高压压缩,为高重复频率下的高能量密度研究提供了新工具。
摘要:
目前,木星或恒星条件下的状态方程测量是通过由数千焦耳、多束纳秒级激光驱动的动态冲击压缩来进行的。这些实验需要对靶标进行精确设计,并对激光的时间和空间分布进行特定调整以达到最高压力。同时,这些研究受限于激光的低重复频率。在此,我们展示了通过单束焦耳级短脉冲激光辐照细丝,可产生汇聚的柱面冲击波,将细丝材料压缩至与上述应用相关的条件。利用硬X射线自由电子激光,采用相位衬度成像技术观察了冲击波,获得了前所未有的时间和空间灵敏度。收集到的Cu细丝数据与流体动力学模拟结果一致,该模拟描述了由细丝表面高度瞬态的脉冲电阻加热引发的烧蚀冲击。随后的柱面冲击波向细丝轴线传播,预计压缩因子达到9,压力超过800 Mbar。针对天体物理相关材料的模拟强调了该压缩技术作为高重复频率下高能量密度研究新工具的潜力。
英文摘要:
Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。