低电压直流氘放电中钯电极α发射的检测
On the detection of alpha emission from a low-voltage DC deuterium discharge with palladium electrodes
AI总结:
本研究通过CR-39探测器检测低电压直流氘放电中钯电极发射的α粒子,发现径迹对应138 keV能量,密度远超对照,表明存在核反应,且反应源于电极本身。
摘要:
本文探讨了在低电压直流氘放电中,钯电极可能发生核反应的可能性。选用固态核径迹探测器CR-39来研究电极发射的高能带电粒子。开发了一种部分自动化的成像平台和特征分类流程,用于扫描CR-39表面并检测径迹。典型的放电参数为:氘气压力10 Torr,电极间隙5-7 mm,电流密度20-40 mA/cm²,阴极偏压-500 ± 100 V。在经过不同离子-阴极通量的放电处理后,CR-39中形成的径迹与从钯电极发射的138 ± 21 keV α粒子一致。氘放电的径迹密度通常是氢和氦对照实验的约100倍。目前,在装置内没有已知的机制能将离子加速到这些能量。产生高能α粒子且没有氦源或加速离子到如此高能量的手段,表明其具有核起源。根据基于径迹几何的粒子轨迹估计,可以得出结论:反应发生在钯电极处,而非来自外部源,如大气中的氡或宇宙射线。
英文摘要:
The possibility of nuclear reactions within a low voltage DC deuterium discharge with palladium electrodes is addressed. The solid-state nuclear track detector known as CR-39 was chosen to investigate the emission of energetic charged particles from the electrodes. A partially automated imaging platform and feature classification process was developed to scan the CR-39 surface and detect tracks. Typical discharge parameters were 10 Torr deuterium, 5-7 mm electrode gap distance, 20-40 mA/cm$^2$ current density, and -500 $\pm$ 100 V cathode bias. After discharge treatments to varied ion-cathode fluences, tracks formed in CR-39 which consistently corresponded to 138 $\pm$ 21 keV alpha particles emitted from the palladium electrodes. The track densities for deuterium discharges were often $\sim$100 times above controls with hydrogen and helium. Currently, there are no known mechanisms to accelerate ions to these energies within the apparatus. The production of energetic alpha particles with no source of helium or a means to accelerate the ions to such high energies indicate a nuclear origin. From particle trajectory estimates based on track geometries, it was concluded the reactions originated at the Pd electrodes and not from external sources such as atmospheric radon or cosmic rays.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。