arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2402.04920physics.chem-ph
收藏

径迹蚀刻聚合物膜的表面电荷性质与孔隙率表征

Characterization of the Surface Charge Property and Porosity of Track-etched Polymer Membranes

Jiakun Zhuang, Long Ma, Yinghua Qiu

AI总结:

本文通过测量径迹蚀刻PET纳米孔的离子电导,提取表面电荷密度并发展出同时表征多孔膜平均孔径与孔隙率的方法,适用于亚100纳米孔和低孔隙率膜。

摘要:

作为多孔膜的一个重要性质,表面电荷性质决定了纳米孔的许多离子行为,如离子电导和选择性。基于双电层对本体浓度的依赖性,纳米孔在高浓度和低浓度下的离子电导分别由本体电导和表面电荷密度控制。本文通过研究不同浓度下径迹蚀刻的单个聚对苯二甲酸乙二醇酯(PET)纳米孔内的离子电导,在pH 10条件下,通过对40个PET纳米孔的测量,提取出PET膜的表面电荷密度约为0.021 C/m²。模拟表明,表面粗糙度会因抑制电渗流而导致表面电荷密度被低估。随后,利用所发展的离子电导方法,表征了径迹蚀刻多孔PET膜的平均孔径和孔隙率。通过高、低浓度下离子电导的耦合理论预测,可以同时获得多孔膜的平均孔径和孔隙率。我们的方法为表征多孔膜的孔径和孔隙率提供了一种简单而精确的途径,尤其适用于具有亚100纳米孔和低孔隙率的膜。

英文摘要:

As an important property of porous membranes, the surface charge property determines many ionic behaviors of nanopores, such as ionic conductance and selectivity. Based on the dependence of electric double layers on bulk concentrations, ionic conductance through nanopores at high and low concentrations is governed by the bulk conductance and surface charge density, respectively. Here, through the investigation of ionic conductance inside track-etched single polyethylene terephthalate (PET) nanopores under various concentrations, the surface charge density of PET membranes is extracted as around 0.021 C per m2 at pH 10 over measurements with 40 PET nanopores. Simulations show that surface roughness can cause underestimation in surface charge density due to the inhibited electroosmotic flow. Then, the averaged pore size and porosity of track-etched multipore PET membranes are characterized by the developed ionic conductance method. Through coupled theoretical predictions in ionic conductance under high and low concentrations, the averaged pore size and porosity of porous membranes can be obtained simultaneously. Our method provides a simple and precise way to characterize the pore size and porosity of multipore membranes, especially for those with sub-100 nm pores and low porosities.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑