用于精密定位的基于超导磁悬浮的非接触式线性滑块的工程设计与性能
Engineering and performance of a contactless linear slider based on superconducting magnetic levitation for precision positioning
AI总结:
本研究提出一种基于超导磁悬浮的低温环境精密定位非接触式线性滑块,具备亚微米分辨率与超9mm对称行程,还提出可通过调整几何参数优化性能的设计规则并实验验证。
摘要:
本文提出了一种可在低温环境下工作的精密定位用非接触式线性滑块。该装置基于超导磁悬浮原理,其滑块(由永磁体构成)与机构的导轨(由高温超导圆盘制成)之间无接触,从而避免了所有摩擦学问题。此外,该滑块具有自稳定性,且由于磁场的高平移对称性,超导体可为永磁体在滑动自由度(DoF)上提供固有导向,因此功耗较低。实验已在低温条件下验证了该滑块具备亚微米分辨率以及超过9毫米的对称行程。此外,本文还提出了一套针对此类机构的设计规则,并通过实验进行了验证。这些规则表明,仅需修改机构的部分几何参数,即可调整装置的性能。通过这种方式,可针对不同的应用和需求调整灵敏度、刚度、分辨率、角跳动以及功耗。
英文摘要:
In this paper, a contactless linear slider for precision positioning able to operate in cryogenic environments is presented. The device, based on superconducting magnetic levitation, does not present contact between the slider (composed of a permanent magnet) and the guideline (made of high-temperature superconducting disks) of the mechanism, thereby avoiding any tribological problems. Moreover, the slider is self-stable and the superconductors provide inherent guidance to the permanent magnet in the sliding DoF due to the high translational symmetry of the magnetic field that leads to low power consumption. A sub-micrometre resolution and a symmetric stroke over 9 mm have been demonstrated at cryogenic temperatures. In addition, a set of design rules for this kind of mechanism has been proposed and experimentally validated. These rules demonstrate that the performance of the device can be tuned just by modifying some geometrical parameters of the mechanism. In this way, the sensitivity and stiffness, resolution, angular run outs and power consumption can be adjusted for different applications and requirements.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。